Deffo taking the key out of the ignition and I haven't plugged my IID in for about 2 months and it was working fine last week so pretty sure I haven't fat fingered something through that.
It is a bit confusing!Ted
D3 HSE | 19" GG AT3 | Mantec Sump Guard | Front Runner Rack | LR ladder | F+R Light Guards | EGR blanked | Decat | RS500 Intercooler | Tuff Trek TT-H1 awning | T Maxx Split Charge | IID Tool | Prospeed rock & tree sliders | V8 Front brakes
23rd Aug 2016 7:56 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
The lock / unlock buttons work?
And you can't programme it to open the tailgate or anything else?
23rd Aug 2016 8:09 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Sorry, .. And you're holding the third button whilst you flash your lights too?
The key/s work perfectly fine. And I'm doing everything as you're supposed to to program the key. I do change the 3rd button program every 6months or so depending on my needs. Never had an issue in the past.
I've tried all the different available options to program it also. I only actually noticed it because I went to reprogram for the boot release as mine has started to become a bit iffy.Ted
D3 HSE | 19" GG AT3 | Mantec Sump Guard | Front Runner Rack | LR ladder | F+R Light Guards | EGR blanked | Decat | RS500 Intercooler | Tuff Trek TT-H1 awning | T Maxx Split Charge | IID Tool | Prospeed rock & tree sliders | V8 Front brakes
23rd Aug 2016 8:20 pm
LRD414
Member Since: 27 Dec 2014
Location: Brisbane
Posts: 18
wiggs wrote:
15MY says it's already enabled in the CCD files .. But it doesn't work
Checked a few and there all the same
I'll try a query again and hopefully not get hijacked .....
What wiggs has found I have found too with mine (MY14)
FMHRL shows as enabled with iiD but doesn't work.
Headlights turn on & off with button presses but no reverse activation.
Is it worth setting to disabled and then back to enabled?
Is there any other tricks for MY14 or 15 to get FMHRL working?
Cheers,
Scott
2nd Sep 2016 8:43 am
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 994
What happens if you have a fuel burner connected to the keyfob. mine works on the third button. So to activate the fuel heater i press the 3rd button once then again within a few seconds to start the process. Can i still have the function to use the 3rd button for the reverse lights with my setup.... D3 HSE
2nd Sep 2016 10:01 am
tcr4x4
Member Since: 24 Jan 2010
Location: England
Posts: 1526
Just searching this. I have only just realised my reverse lights come on, on the second press and thought it was a fault. I also thought I had a dodgy fob. Up until now to start my fbh, I've been pressing fob for lights on, press again, but lights still on, then press again and lights go off and fbh starts. This seems to work, so yes you can have reverse lights with fbh but it needs 3 presses.
10th Oct 2016 7:55 pm
armalites
Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
I guess the FBH controller is waiting to see the transition lights off-lights on-lights off as you say you need to press 3 times to achieve that when you have follow me home reverse.IID PRO
MSV Extreme
Nanocom One
11th Oct 2016 7:16 am
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 994
I understand this procedure for the lights but it also starts my FBH up as well when i do not need it on.I have it setup with my LR button
1st press front lights on
2nd press within 10 secs FBH starts and Rear lights on.
How do i stop FBH from starting when i do not need it... D3 HSE
12th Oct 2016 11:15 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Let the lights stay on for more than 10 seconds and it won't fire the FBH up. Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
12th Oct 2016 5:47 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 994
Thank you very much........ D3 HSE
12th Oct 2016 6:39 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 994
Back again
This did not work.2 press of fob gives me front lights on and reverse lights and FBH if i wait 10 secs or more after 1st press it turns the front lights off.D3 HSE
12th Oct 2016 8:12 pm
LRD414
Member Since: 27 Dec 2014
Location: Brisbane
Posts: 18
wiggs wrote:
15MY says it's already enabled in the CCD files .. But it doesn't work
Checked a few and there all the same
Hi, what wiggs has found I have found too with mine (MY14)
FMHRL shows as enabled with iiD but doesn't work.
Headlights turn on & off with button presses but no reverse activation.
Is it worth setting to disabled and then back to enabled?
Is there any other tricks for MY14 or 15 to get FMHRL working?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
