Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
Those are the ones I bought, they have the Landrover logo and the blade fits perfectly.
I did buy some others previously that looked identical but the blade was a different size. Seller claimed nobody had an issue beforeIID PRO
MSV Extreme
Nanocom One
10th Oct 2015 7:43 pm
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
Oops sorry about the link to the batteries
Martin - The key shell's I got off eBay have the Land Rover logo on them - they look good to me (don't know what an original one should look like though) & I can use all the buttons again
11th Oct 2015 10:53 am
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Martin wrote:
Anyone had any luck getting a new keyfob case with a proper LR logo on it, or are they all blank oval buttons?
One of my fobs has a split button so it needs the case changing really
Key turned up today from the link Landie put.
Came with a black sticker on it.
Under the sticker is a Land Rover symbol
Long since time I bought one (or two) if we can get them with logos on.
I'd better get one ordered quickly before LR put a stop to it...Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
13th Oct 2015 6:16 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Already got another on the way
13th Oct 2015 6:39 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Worked great. It took about 30 mins ( that includes taking it back part because the flip wasn't powerful enough, it appears to need 3 full turns to be similar to standard) But now I have a new looking key that works first time
Dremel whizzed through it
13th Oct 2015 9:25 pm
dadon
Member Since: 06 May 2015
Location: Northants
Posts: 482
I spent only a few quid on battery and then 15 min replacing it. Piece of cake. Patience and steady hands are needed. I have used gorilla glue for waterproofing.
All done 4 months ago and works beautifully.Disco 3 HSE (55) - gone
BMW x3 (62) x30d MSport - current
13th Oct 2015 11:22 pm
carreragt7
Member Since: 22 Jul 2015
Location: Utah
Posts: 30
I was going to post this link for you but it looks like you got it all sorted. Looks to be similar to the ones I ordered. For anyone else located in the US, the seller I bought mine from was this one:
http://www.ebay.com/itm/Land-Rover-LR3-Ran...1c5089417f
14th Oct 2015 5:13 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
tayaste wrote:
it appears to need 3 full turns to be similar to standard
Have just done 1 of mine, I tried 3 turns on the key blade and destroyed the spring
Luckily the spring from the old fob fits the new case perfectly. Only needed 1 turn for me.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
Have just bought two new cases (and batteries) to sort my worn keys out, any recommendations on what glue is best to stick the new cases together?The End
19th Nov 2015 1:58 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
I used superglue, as that was what I had
A couple of cable ties to keep the shells together while the glue set seemed to do the trick.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
19th Nov 2015 2:06 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
+1 for the superglue and cable ties. Still holding together well, it's not often I go swimming with my car keys on me so no need for any mastic or sealant over here
19th Nov 2015 2:14 pm
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
I've not got round to gluing mine & they're just fine without tbh, not had any problems with either of them.
If you haven't glued them together Landie71 have you got cable ties on them permanently? Or did you buy the click together version I spotted on ebay (but avoided as they cost more and didn't have the LR logo on them)?The End
19th Nov 2015 3:04 pm
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
Just clipped them together, would have glued them if I could have been bothered to get some glue out of the garage (& they've got the logo on too - they were these ones: http://www.ebay.co.uk/itm/Fits-RANGE-ROVER...rmvSB=true if that helps?)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum