Member Since: 02 Jul 2007
Location: MERSEYSIDE
Posts: 86
mine are "defo"blank-off the only problem with removing the plug is unless the lens can be split drilling will leave a lot of on the lens /front glassaudi rs4 b7 panda multijet vespa et4 abbey spectrum
17th Jul 2007 12:24 am
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
DG wrote:
Yeah...even though the wired lamp holders seem to be present on all models...the UK units still have the blanking piece preventing their use
dead right, mine were like that. i drilled them out, it works but you are right. its not brill just different.CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
RH lamp and I'm betting the LH one is XBC500052
Bizzare, that's the correct ones, maybe you just got lucky and they used the wrong bits making them The End
Yep, I also did this using the original side-light bulbs when replacing them with LEDs. As others have said, results are not brilliant, just different. But if anything can help all the blind gits that seem to be able to get driving licences these days to see me then it's fine with me!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
on the lens /front glass
