Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
Do I need to change my nuts
I just been offered some shiny alloys off a new TDV8 to replace my damaged 18"s on my disco III. Do I also need to change the wheels nuts as well ? Thanks in advance Biffa
13th Jul 2007 12:24 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50971
Shouldn't do...All FFRR wheels post 2006 fit the Disco 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
13th Jul 2007 12:26 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72955
And look very nice too if I do say so myself!
13th Jul 2007 12:29 pm
Biffa1969
Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
Thanks for the info, the picture should help loosen the wives purse strings. Next stage is to book it in for a complete colour code respray . Bumpers, archs, door handles door pilliars, tail gate, rear plate light holder, basically all that can be painted. Should remove the problem with over polish marks on the plastic.
13th Jul 2007 12:56 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72955
Biffa, what price were you offered these wheels at (IYDMMA)??? Generally new take offs on fleabay go for about £500.
13th Jul 2007 1:03 pm
Biffa1969
Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
Four & half hundred for pound notes, I thought a good price compared with two new tyres and relacquer of the four alloys, thanks to land rover cleaning them with some strong stuff, looked brillant when purchased then down hill since.
13th Jul 2007 1:56 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72955
Not a bad price, you could even flog your old wheels off on fleabay or keep them for putting on tyres for the mud!
13th Jul 2007 1:58 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Biffa1969 wrote:
Thanks for the info, the picture should help loosen the wives purse strings. Next stage is to book it in for a complete colour code respray . Bumpers, archs, door handles door pilliars, tail gate, rear plate light holder, basically all that can be painted. Should remove the problem with over polish marks on the plastic.
Yeh go for it ..it looks great
Click image to enlarge
G4 Gone ...but not forgotten
13th Jul 2007 3:50 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Wiggs , see from your postings you've fitted a rev camera . Did you buy seperates or wire a camera to your console screen ?
13th Jul 2007 4:06 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Discowex wrote:
Wiggs , see from your postings you've fitted a rev camera . Did you buy seperates or wire a camera to your console screen ?
Wired to the sat nav screen , although at the moment you have to access it through the diagnostic screen ...G4 Gone ...but not forgotten
13th Jul 2007 4:12 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
, thought so . Was hoping you had bought a monitor that you could recommend.Have read Arsi's posting on the Kenwood touchscreen but was sounding out alternatives that would fit into the sat nav , or in my case , non sat nav cubby . cheers , D
13th Jul 2007 4:16 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
If you dont feel like hacking away at your cubby hole why not try a rear view mirror monitor ?
Some are quite smart ...the mirror turns into the screen when you pop it in reverse.
And if your car is the equivelent to the "s" you proberly wont have the auto dimming mirror anyway .
There are also sun visor screens , but to be practical you would have to leave your sun visor down
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Wiggs for your help
13th Jul 2007 4:32 pm
Biffa1969
Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
Wiggs,
Do you have have other pictures of the colour coding, ie from front and back ?
Also who did your paintwork I've been quoted £1100 + vat from prospray at Irlam. With you being M/cr based I could compare prices. Cheers
25th Jul 2007 4:03 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Here ya go
I have loads more but i have exceeded my upload limit
As far as cost goes i paid £500 all in ...however it was the first disco 3 he had ever done ... i also gave him all the instructions how to remove all the parts .
It did have to go back a couple of times as he had not rubbed some off the arches down enough to remove the "bobble effect ".
I can give you a number if you want ..hes based in Radcliffe ...but he may charge more than mine as it turned out very time consuming for him ...on the other hand he know 's what he 's doing now so it could be the same.
I would also ring round a few sprayer's ..you would be supprised at how much difference they charge.
Just for an example ..i damaged my front bumper on an offroading day ..mainly scratched the paint .
to spray the bumper ..with me taking it off ranged from £80 - £220 ....Big difference
Any more info you need just let me know ....also are you considering getting your door handles sprayed aswell?G4 Gone ...but not forgotten
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum