NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
11th May 2015 7:53 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The reverse is on the 12s on pin 1 and pin 8 on the 13 pin. If you are only using the 12n then there is no reverse.
I hate 7 pin plugs and always hack them off and fit a 13 pin plug. The 7 pin arrangement is just terrible.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18526
As Robbie says - which way is your adapter? 7 pin on Disco or 13 pin on Disco?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
11th May 2015 11:19 am
Nick H
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
7 pin on the disco, 13 pin on the bike trailer.
So in summary current set up won't provide reverse lights as there isn't a pin?
How easy is it to change the 7 pin to 13 on the disco?
Thanks
Nick
11th May 2015 8:44 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
It's no bother to fit the LR 13-pin loom as a DIY job.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
Seems like a lot of extra wires that won't currently exist behind the 7 pin adapter so I take it this is a new loom? As I already have the electrics enabled then assume just the loom needed?
Thanks
Nick
11th May 2015 8:55 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26754
I believe it needs a dealer or an electronic box to 'tell' the car which type is fitted?
Its something I must do soon, as my new caravan has 13 pin. I bought a twin 7 pin to 13 pin adaptor, and it work with all the lights, but its a big ugly thing to have to use.
11th May 2015 8:56 pm
Nick H
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
Great thanks, appreciate all the help
11th May 2015 8:57 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The D4 does not appear to care if it is set to either 7-pin or 13-pin in the CCF, so it should just work when you fit the new loom.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum