Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
I have an ABS speed sensor on order,my question is, how difficult is it to fit ?
The hub end looks easy enough,it's the other end that plugs in under the dreaded black covers I've never seen .
Any hints and tips are greatly appreciated
|
2nd Mar 2015 5:01 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6267
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 XS Auto Stornoway Grey 2007 Discovery 3 TDV6 XS Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Very easy to fit just pop a few plastic fasteners off the inside wheel arch cover and you can then get to the plug and socket underneath there.
Flack
|
2nd Mar 2015 5:03 pm |
|
|
|
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Thanks guys,I kinda thought it would be harder than that,do the grommets swap out easy ?
|
2nd Mar 2015 5:07 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6267
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 XS Auto Stornoway Grey 2007 Discovery 3 TDV6 XS Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Yes you just pull the center bit out first then the locking collar.
Flack
|
2nd Mar 2015 5:17 pm |
|
|
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Thanks for your help,took me about half an hour to have a good look,remove the old one and replace the new one.Very easy and straight forward.
Still got a dash full of lights and no programs.I'll search for faults later and see what the codes are
John
|
5th Mar 2015 3:23 pm |
|
|
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Read the fault codes today and got this
Vehicle Dynamic
C1A94-13 (0B) Front right wheel speed sensor circuit - General electrical failure - circuit open
I replaced the sensor so does this mean there is a bad wire somewhere in the wheel arch where it plugs in,and would I be right in thinking this is why it's still showing P brake fault and all the body control faults
Thanks. John
|
6th Mar 2015 4:46 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20781
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Cairns Blue 2005 Discovery 3 TDV6 HSE Auto Cairns Blue](../images/veh/cairns_blue.gif)
|
It is 2 wires between the ABS module, and the connector behind the arch liner
You need to get hold of the wiring diagram, and pin numbers, and check continuity.
Before we get to that though, what brand of sensor did you fit? My D3 Build Thread
TDV8 Retrofit Build Thread
|
6th Mar 2015 7:41 pm |
|
|
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Hi Mikey how you doing
It's a Bosch sensor
|
6th Mar 2015 8:02 pm |
|
|
|
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Yes that's kinda what I thought too Mikey
I'll have a look and see if I can find a wiring diagram ..fingers crossed
Thanks
John
|
6th Mar 2015 9:12 pm |
|
|
|
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Bonatti Grey 2006 Discovery 3 TDV6 S Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
That would be great Mikey .Ill pm you my email
Thanks
|
6th Mar 2015 9:37 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.