Tony686
Member Since: 23 Oct 2007
Location: Essex
Posts: 636
  
|
| Judder under breaking new discs and pads |
|
2010 D4, had the pads and discs changed yesterday by an independent, all running fine, but this afternoon I have a judder when breaking at firm at 70mph. It's like the abs kicking in and out, rather thanwheel wobble.
The pads and discs are made by delphi. I have notice the front pads are different from the ones they took off, in as far as there looks like there is some sortof weight on the old front pads 
I am informed they assure me they are the right pads basedon the vin number 
The wheels were rebalanced today after I noticed it, but not solved it. Anybsuggestion, need bedding in or think it's the wrong pads? I have looked on the net and both pad types are shown 
Tack[/i] CLUB DEFNER
|
 9th Oct 2014 9:10 pm |
|
|
|
|
Tony686
Member Since: 23 Oct 2007
Location: Essex
Posts: 636
|
Delphi.
I know they also make stuff direct for LR as their name is plastered on the side of the air suspension, so when I was told Delphi I accept them as an ok make. For all I know they make LR's genuine pads/discs? CLUB DEFNER
|
| 9th Oct 2014 9:17 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
  
|
Delphi discs should be alright. There may be a bit of rust behind the disc, causing it to run out of true, and giving the vibration.
Best advice is to take it back
EDIT: Assuming it can be felt through the steering, it will be the front end. If only felt through the pedal, it will be rears My D3 Build Thread
TDV8 Retrofit Build Thread
|
| 9th Oct 2014 9:23 pm |
|
|
