| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
mohnwalk
Member Since: 07 Oct 2013
Location: The wilderness
Posts: 205
  
|
| Help in finding partnumbers |
|
Hi!
I have completely rusted brake disc splash shields in the back - both sides. Need to change them out. I have a bad squeak when driving, but first when driving a while. Guess some of these parts gets hot and expands, then the noice. I removed parts of the splash shields and saw that these had contact with the brake discs. Noticeable too!!
But when driving home again, after a while the squeak comes back. Could it be the calipter or the EPB brake shoes?
Anyways, I would like to replace all this, but cant seem to find all the parts needed.
I would like to change:
Both splash shields in the back.
EPB brake shoes, springs and pins etc both sides.
I have replaced my brake discs and pads front and back last year.
Any help with the partnumbers would be much appreciated!!!
|
 31st Aug 2014 5:35 pm |
|
|
Woolmeister
Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3459
|
The rear splash guards should be:
LR025152 (LH)
LR025154 (RH)
Looks as though they are approximately £50 each in the UK.
Personally, I would not pay LR prices for the EPB shoes and clips. You can buy a full set of good quality aftermarket (Borg & Beck) EPB shoes from Advanced Factors for what LR charge for one side only. I bought a set of these and fitted them to my own D3.
Have a look here:
http://www.advancedfactors.co.uk/bs6416-ep...1674-p.asp
Steve 2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
|
| 31st Aug 2014 8:04 pm |
|
|
DN
D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2317
|
Bear in mind that to replace the rear backplates, the hubs have to be pulled out, which may well damage the wheel bearings, which would require replacing and things pressing in again, (usually requires very sturdy pullers and press equipt ), a job and a half on most cars,let alone a D3. 
Are you sure they can't be de rusted and re painted for the time being?.......... 
|
| 31st Aug 2014 8:17 pm |
|
|
disco4ever
Member Since: 23 Dec 2013
Location: under the car
Posts: 402
  
|
.....for all your part no. needs. www.lrparts.ru Achim
own garage certified LR tech
Disco 2 TD5 MY 2001 - gone but still driven by another owner
Defender 110 TD5 driving me bananas with all faults
Disco 3 TDV 6 HSE MY 2005 gone @280.000 km
Disco 4 SDV 6 HSE MY 2012
|
| 31st Aug 2014 8:45 pm |
|
|
mohnwalk
Member Since: 07 Oct 2013
Location: The wilderness
Posts: 205
|
Thanks for the replies:)!
Well, there are almost nothing left of my backplates, so I think it is time to get some new ones! Very bad they way they are. Completely ruined!
I get to borrow a fully equipped garage when I need to, so I would have all the tools needed to get this sorted. But I am aware that some problems could occure.. Lets hope not  !
Woolmeister - thanks for the tip! Will certainly check out advancedfactors for the EPB shoes!
|
| 31st Aug 2014 8:48 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
