lemansfan
Member Since: 03 Aug 2012
Location: Reigate
Posts: 91
  
|
| D3 cruise control activation |
|
Hi
I'm relatively new to the forum so apologies if this has been asked a thousand times before.
Is there anyone in Surrey/Sussex/Kent who could activate my cruise control? I've fitted the switches and tried a local chap who could manage it.
I have an 07 TDV6 GS
Ta in advance
|
 26th Aug 2014 6:09 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6278
 
|
Yes contact Geoff site sponsor he will sort you out..
Flack 
|
| 26th Aug 2014 6:47 pm |
|
|
lemansfan
Member Since: 03 Aug 2012
Location: Reigate
Posts: 91
|
Ta
I've heard his name mentioned but can't yet pm (too few posts!)
|
| 26th Aug 2014 6:56 pm |
|
|
lemansfan
Member Since: 03 Aug 2012
Location: Reigate
Posts: 91
|
Try this for my 3rd post!
|
| 26th Aug 2014 6:58 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6278
|
keep posting then lol
Flack
|
| 26th Aug 2014 6:58 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Is he back up and running yet....? Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 26th Aug 2014 10:20 pm |
|
|
lemansfan
Member Since: 03 Aug 2012
Location: Reigate
Posts: 91
|
No - still unwell I'm afraid.
|
| 26th Aug 2014 10:25 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
 Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 27th Aug 2014 12:07 am |
|
|
lemansfan
Member Since: 03 Aug 2012
Location: Reigate
Posts: 91
|
Bit of an update.
My local independent guy tried this with his Autologic kit, which failed twice.
He is scrolling through the various options and setting the speed control to "fitted". The kit then asks whether the motor has highline or loline. He confirms loline and tries to save. The kit then goes into a routine - modules shutting down and waking up etc before it finally says that it failed to save.
Are we doing anything wrong? (Also, fuse 5 wasn't fitted in the engine bay box while we were trying this, but I'm not sure whether that would have prevented the amendment from saving).
|
| 27th Aug 2014 6:03 am |
|
|
