eze_zeppelin
Member Since: 18 Aug 2014
Location: Lujan,Bs As
Posts: 2
![](templates/vbnew/images/spacer.gif)
|
Chineese remotes for Disco 3 |
|
Hi for everyone!! My name is Ezequiel, from Argentina. I'm car locksmith. I've been working a lot here with Rover and Land Rover. Not much people gets interested with this car so I've taked advantage of that I'm owner of Rover 420 petrol and I have a great affection to both brands.
So, I have started programming keys (plips actually) for old models and now for new models.
I have equipamentfor programming keys to discovery 3, freelander 2, etc...
If there is somebody in the fórum knowing about key programming for land rover, you may already know that the transponder chip is integrated to the remote board. So when you program a Brand new key, there is no need for remote program. This gets program automatically wih the key.
So I found this Chinese remotes on ebay, but this controls have transponder chip and remote for separated. So when you program the chip, you still need to program the remote.
Does anyone know progamming procedure for this remotes and if is manual o needs a programmer?
http://www.ebay.co.uk/itm/suitable-for-LAN...20e06148db
So far, I only give a simple key programmed for a Disco3 and Range Rover, and I wish to offer the complete key for clients.
Any help will be enormously grateful...regards!
|
24th Aug 2014 3:27 am |
|
|
VMatas
Member Since: 26 Jan 2012
Location: Rybnik
Posts: 147
![](templates/vbnew/images/spacer.gif)
|
With 7936 no central locking, only engine start.
|
24th Aug 2014 8:28 pm |
|
|
eze_zeppelin
Member Since: 18 Aug 2014
Location: Lujan,Bs As
Posts: 2
![](templates/vbnew/images/spacer.gif)
|
Hi Vmatas! thanks for answering. Of course, by know I just program a simple key on a Ford Hu101 using a pcf7936...
so, why does this chineese exist for? isn't there any procedure to programming control for separated?
very thanks!
|
25th Aug 2014 3:04 am |
|
|