Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
MY14 perm live
Finally got round to refitting blackvue.
Problem with supply as it seems on my14 the spare 28 & 29 slots don't have the gubbins to accept a fuse!?
Just a blank slot.
Click image to enlarge
Any other perm live fuse I can use? I have the piggy back fuse connector so can use in use fuse if needs be.XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
27th Sep 2014 9:47 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Weird CJB.
I don't have a MY14 wiring diagram but if you leave everything alone long enough for the car to sleep, connect the neg lead of a DMM to a good ground and then run the pos lead down the test contacts on the fuses you will find all the perm live fuses very quickly.
Fuse test contacts (albeit doing a voltage drop test in this case):
Click image to enlarge
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
Meddled with multi meter and looks like Electric seats stay live?XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
27th Sep 2014 10:16 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Sounds plausible for the passenger seat to stay live even when asleep as I think the switching is done at the passenger seat itself with no other electronics. The driver's seat will go via a memory module connected to the vehicle bus. It must be a pretty high amperage circuit (30 amps?).
If anyone has the 2014/15 wiring diagrams I would welcome them.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
On my MY2015 I had the same problem, I think I used the fuse for the towing electrics although I would have to have another look to confirmCheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
27th Sep 2014 2:50 pm
DaveC
Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
just to confirm electric seats fuse works fine for perm live. XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
29th Sep 2014 3:20 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Thanks for the update Dave.
Did you confirm the amperage of the seat fuse in the MY15?
(I've yet to see a piggyback fuse block rated higher than 20 amps and most are 10 amps.)
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
F41 is live
I use that to power the blackvue with a piggyback fuseDuncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
29th Sep 2014 3:35 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Thanks Duncan, F41 looks to be down at 5 amps too.
This would seem a better option - no fun melting or setting fire to your CJB.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
robbie
never realised the piggy back wasn't rated too high, thought it was the fuse inside it that determined
think seats are 30 or something but funnily enough as i didn't know which fuse to substitute in the pigy back i left both at 5 thinking seats will blow fuse so i'll know which to swap. still fine so seats mustn't draw too much when used individually.
looks like i'll play it safe and swap for 41XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
30th Sep 2014 10:38 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Piggybacks are a bit odd in the fact that the correct fuse location is not marked. I can never remember which is which so have to check with a multimeter each and every time.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
