Lee11oyd
Member Since: 04 Nov 2012
Location: Leicester
Posts: 4
  
|
hi all just about to swap my 12n/s electrics for a 13 pin set up that I've just purchased, just wondering if the first part of the loom on both kits are the same? thinking it might save me some time. 
|
 5th Jun 2014 7:43 pm |
|
|
jimbojay
Member Since: 01 Dec 2008
Location: Wet & Windy West Coast (Ayrshire)
Posts: 157
  
|
HI Lee,
I did this a couple of months ago on mine and I am 99% certain they are the same, I will be honest though I changed the whole lot seeing as I had bought it!!! Dont forget to uprate one of the 15A fuses to a 20A cant remember which one but it's in the handbook, if you have ATC or equivalent!!
Cheers
Jamie
|
| 6th Jun 2014 8:40 am |
|
|
Lee11oyd
Member Since: 04 Nov 2012
Location: Leicester
Posts: 4
|
thanks jamie just me being lazy i guess! 
|
| 6th Jun 2014 11:09 am |
|
|
jimbojay
Member Since: 01 Dec 2008
Location: Wet & Windy West Coast (Ayrshire)
Posts: 157
|
 I had the same thoughts about not renewing the first part but only when I had already stripped it out 
|
| 6th Jun 2014 7:08 pm |
|
|
richuk
Member Since: 27 May 2012
Location: Dorset
Posts: 559
|
Is there any reason you can't just change the socket? Rich
semper in excretia sumus solim profundum variat
|
| 6th Jun 2014 7:23 pm |
|
|
