Yep sure did that's why I thought it strange when this one doesn't, my first Disco was a new 05 plate HSE, next was a new 07 plate HSE then came my first Sport 06 plate HSE then my new 10 plate Sport sold due to possible redundancy went back to a car 3.0 ltr XF but wife said too low for her so bought a late 09 plate Disco HSE with folding mirrors but not when locking.
So all the cars above had folding mirrors on locking the car apart from the 09 plate
24th Sep 2014 10:50 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Ok… if you are convinced that you are not mistaken but for clarity every D3 I have seen so far, including the HSE I owned for 8 years, has been wired like this:
Click image to enlarge
The D4 on the other hand uses a bus command to trigger the mirror fold, rather than the simple switch on the D3.
Land Rover - Turning Drivers into Mechanics Since 1948
This is weird, I remember on the rimini red07 plate D3 the drivers side mirror started to stick half way in, I was worried that the motor would burn out never blew any fuses. The LR garage fitted a new one but said it was a common problem due to the alloy from which it was made they said they could have lubricated it but just fitted a new one under warranty. I'll ask in at the dealers see what they say, thanks for your help and info.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
sure did that's why I thought it strange when this one doesn't, my first Disco was a new 05 plate HSE, next was a new 07 plate HSE then came my first Sport 06 plate HSE then my new 10 plate Sport sold due to possible redundancy went back to a car 3.0 ltr XF but wife said too low for her so bought a late 09 plate Disco HSE with folding mirrors but not when locking.
