Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
There is an updated diff breather available which is a lot less likely to stay closed.
Standard in this picture
[URL=]
Click image to enlarge
[/URL]
Cut the old one off
[URL=]
Click image to enlarge
[/URL]
And push the new 90 degree breather on
[URL=]
Click image to enlarge
[/URL]
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
15th Jan 2017 9:19 am
Ding287
Member Since: 24 Sep 2019
Location: Lancashire
Posts: 43
Re: Mud Flaps
Hi any chance of loading the pictures again so I can have a look thanks
LandRoverAnorak wrote:
The other job I managed to do today was fit some Series Land Rover rear mud flaps. After a bit of double measuring on the first one, it was a relatively straightforward task.
Click image to enlarge
They're secured with a couple of large self-tappers drilled into the arch liner and a couple of 6mm plastic nuts and bolts that pass right through. The latter uses one existing hole and then a second new one. I'll probably replace the self-tappers with some stainless ones but didn't have any of the right size to hand at the time.
Click image to enlarge
Each flap was cut to fit around the exhausts as shown on the sketch below:
Click image to enlarge
All finished (in off-road height):
Click image to enlarge
I'm quite pleased with the result, although I may have left them a bit long. I'll live with them for a few days and see how they go. I can always cut them down a bit if necessary.
30th Nov 2019 4:37 pm
LandRoverAnorak
Member Since: 06 Mar 2014
Location: Surrey
Posts: 1172
With apologies for the nearly five year delay , all of the missing photos in this thread have now been restored!Darren
"You came in that thing? You're braver than I thought!" - Princess Leia
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
, all of the missing photos in this thread have now been restored!
