bsm
Member Since: 14 May 2012
Location: Ellikom
Posts: 232
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 HSE Auto Alaska White 2008 Discovery 3 TDV6 HSE Auto Alaska White](../images/veh/alaska_white.gif)
|
Recovering: what car settings? |
|
When you want to recover a stranded vehicle what setting do you put the D3 in?
Settings I think are clear
- low range
- standard hight, to have less stress on suspension and axles
Other things I'm not so sure of
- TR in rock crawl mode? Locks the center diff.
- DSC off/on?
- Gear box in command shift, 1st gear?
It will also depend on the surface the D3 is on I guess. If it's on tarmac, maybe put it in road mode just low gearing. If it is on a slippery surface set the TR to the correct surface?
Rock crawl also apply's the brakes slightly so you would lose some power!?
The more I think about it the more I get confused, any ideas/tips welcome. 2017-...: Disco II Td5 auto, 1999, BAS remap, HD TC and auto box Ashcroft, Allisport IC, ACE, 2" lift only coils, BF goodrich KM2 265/70R17, FF front and rear bumper, TF steering guard and tree sliders, nanocom.
2013-2017: Disco 3 TDV6 HSE aut. of 2008, Britpart treesliders, IIDTool, RLD sump guard, BFG KM2 265/70R17, adj. rods, BAS remap + EGRs blanked, silicon IC hoses.
2010-2013: Disco II Td5 of 2000, ACE, front Bearmach HD coils, rear SLS, GG AT2
|
22nd Mar 2014 11:35 am |
|
|
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Zambezi Silver 2006 Discovery 3 TDV6 S Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Even in snow, normal settings have been fine for me
|
22nd Mar 2014 11:59 am |
|
|