Member Since: 06 Mar 2014
Location: Surrey
Posts: 1167
Tow bar wiring
Hello folks,
I was having poke around my new D3 today and came across the wiring for the tow bar electrics behind the LH panel in the boot. I then noticed that it's missing a fuse, as shown below. Does anybody know what this might be for or can point me at a wiring diagram?
Many thanks.
Darren
"You came in that thing? You're braver than I thought!" - Princess Leia
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
You are missing a 7.5 amp fuse. This is probably for the trailer fog lights but you need to double-check the fuse order. Yours looks upside-down with fuse 1 at the bottom and fuse 6 at the top. Either the block is upside-down (no harm in this at all, but it could confuse) or the fuses are all in the wrong place.
The fuse list is in your owner's manual. If you do not have this they are available for free download from Land Rover.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
My pleasure.
If you have DMM then it is worth checking for correct continuity between the fuse and the trailer plug pin, just in case there was a fault which prompted the previous owner to remove the fuse.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum