xyplex
Member Since: 13 Jan 2013
Location: Bedfordshire
Posts: 240
  
|
| Is my brake switch faulty again?? |
|
When I took delivery of my Discovery 4 in March 2013 it was a painful experience to try and convince the dealership that there was a problem with my car.
The problem was that when I slow down at a junction or roundabout the car engine would make a dull drowling vibration. A long story short they replaced the brake switch and the problem was resolved. I eventually noticed that this problem would occur when the engine rev below 1000rpm
and clears when revs go above 1000rp.
But the same occurrence happened again in November 2013 and a different dealer changed the brake switch again the problem reocurred again a couple of weeks later and this time the vibration is there but less than previous.
I booked my car in for JAn 2014 and guess what the engineer was on a training course and I was furious as I had too wait so long over the christmas period. now they said I had too book it in again and I had to wait til 10th Feb 2014.
What crappy service for LR Dealership.
I wanted to ask the Land rover Moderator on this site is there a person on this site that has contact with Land Rover Engineers at the plant and ask them what they think is going on with my car?
|
 4th Feb 2014 5:12 pm |
|
|
outofyorkshire
Member Since: 27 Apr 2009
Location: Emigrated to Notts
Posts: 1021
|
i would send a PM to Pete@LandRover  Cheers Ian
___________________________________________
MY13 FL2 HSE lux - just gone
MY10 D4 XS
MY07 D3 SE
Massey Ferguson 400 FIS AGTV - Arctic Cat by any other name...
Citroen C3 Picasso for SWMBO so we can remember what fuel economy is!!
Member of the Narpy torch club
|
| 4th Feb 2014 6:55 pm |
|
|
CRC@LandRover
Verified Account
Member Since: 12 Oct 2012
Location: Coventry
Posts: 415
|
Hi Xyplex,
Please see your inbox, I have sent you a PM.
Many thanks,
Pete
|
| 7th Feb 2014 4:49 pm |
|
|
