Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
I replaced the fuse which was snapped. Fogs worked for only 10mins before the new fuse snapped! It's a 15amp. What could be causing this? Should I put a 20amp in?
Thanks.
|
31st Jan 2014 1:16 pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
|
there was a problem in the early days with chaffed wires - should be plenty of info if you do a search Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
31st Jan 2014 1:21 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
It's a common problem with the wire chaffing on the end of the bumper
Pull off the passenger fog light surround .. Undo a few screws , remove the fog light and you should be able to see he offending wiring.
Tape up and refit fuse G4 Gone ...but not forgotten
|
31st Jan 2014 1:22 pm |
|
|
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
Thanks for the info. Much appreciated.
|
31st Jan 2014 1:28 pm |
|
|
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
How do I get to the light, I can't see any screws ect...
|
31st Jan 2014 3:00 pm |
|
|
Woolmeister
Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3459
|
The bezel just pulls out of the bumper. There's a little gap at the inside top of the bezel you can get your finger in to pull it. It's held in place by about 5 metal spring clips.
The fog light is then held in by 3 x torx (T20) screws. Remove those and it will come out. Take care not to lose the torx screws down inside the bumper! The fourth, cross head screw, is for adjusting the levelling of the fog light. No need to touch this one.
Steve 2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
|
31st Jan 2014 3:03 pm |
|
|
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
Thanks Steve!
Heavens have broken so will attempt it tomorrow.
|
31st Jan 2014 4:43 pm |
|
|
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
Drivers side wire was exposed. Taped, new fuse and working fogs.
Thanks for the advice lads!
|
19th Feb 2014 5:55 pm |
|
|
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
Spoke to soon.....
Drive car this morning, after 5mins of having the front fogs on POP!
God knows why it's still doing it, I can only assume another wire deeper down is faulty. All my other lights are fine.
|
20th Feb 2014 10:12 am |
|
|
Arctic Monkey
Member Since: 20 Nov 2013
Location: South
Posts: 53
|
All sorted, both wiring looms were shot!
New looms now replaced, working fogs again.
|
8th Mar 2014 1:21 pm |
|
|
mickdundee
Member Since: 06 Feb 2011
Location: Somewhere between the Moon & NY city
Posts: 302
|
Don't you just love this site!
|
8th Mar 2014 1:55 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.