Jiminyjams
Member Since: 05 Oct 2013
Location: Bury St Edmunds
Posts: 6
  
|
| LR007484 Tow bar valid configurations |
|
I have the LR007484 tow bar and am using a tow ball.
When I bought the car the tow ball was on the lowest (350mm) height setting. I have needed to raise this to the 400mm position. I tackled this using common sense, but I found that not all of the 6 bolt holes were countersunk to take the blanking allen bolts so this made me wonder If just moving the tow ball up one notch to the middle pair of holes is a valid option. I found some instructions online.
http://media.disco3.co.uk/ownerinfo/LR0057...height.pdf
I am not sure if these instructions are showing all or only some of the valid configurations.
Currently I have left the plate with the 6 holes in place and have simply moved the tow ball to the middle pair. Does anyone know if this is okay to do this?
Many thanks,
Jim
|
 28th Dec 2013 3:37 pm |
|
|
