Member Since: 13 Mar 2012
Location: Cherrybrook, NSW
Posts: 30
pulled out front diff breather hose
Hi all,
When I'm replacing front diff breather cap, i pulled the host 10 cm out of it's original location. I though it might just be some clip fall off and give the host extra movement somewhere...Now it's a bit hard for me to push it back.
Anyone knows if it's easy to snap off the bottom end connected to the diff?
pardon my English and hope you guys understand what I meant.
Cheers
Tom
8th Dec 2013 2:30 pm
Spooky
Member Since: 02 Jun 2009
Location: Swindon, Wilts
Posts: 1013
The bottom end simply pulls out of the diff ... and then pushes back in. You'll really need to jack the car up and remove the wheel for access, mind ...Regards,
Mick
- 2014 SDV8 Autobiography
- 'Vincent' - 2010 TdV8 Vogue SE - 'Molly' - 2005 HSE Auto
'Dixie' - 2000 D2 Td5 ES
8th Dec 2013 9:07 pm
tomwu
Member Since: 13 Mar 2012
Location: Cherrybrook, NSW
Posts: 30
oops....
thanks mate
10th Dec 2013 12:42 pm
tomwu
Member Since: 13 Mar 2012
Location: Cherrybrook, NSW
Posts: 30
Spooky wrote:
The bottom end simply pulls out of the diff ... and then pushes back in. You'll really need to jack the car up and remove the wheel for access, mind ...
Checked, found the pipe is pretty securely attached to the diff. Not easy to snap off... hopefully I was checking the correct pipe.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum