Member Since: 02 Mar 2013
Location: Newcastle
Posts: 144
Hi Ben
I had to change my sump due to a hole rusting in it, easy job did it in extended mode
protection plate comes off easy just a bit heavy
drain oil
the connector on the side of the sump can be a pain to get off and is worth taking your time
loosen bolts drop sump (its a good opportunity to see if there is any gunk and god forbid any metal shavings in the bottom of the sump just to make sure there is no engine wear)
clean the face on the bottom of the engine of any old gasket
position new gasket on sump screw bolts back in when I did mine used all new ones they were penny's compared to rounding a head and not been able to tighten
may as well change the oil filter at the same time
new oil in
cup of tea time!
6th Dec 2013 10:05 pm
BenDisco3
Member Since: 04 Dec 2013
Location: Scotland
Posts: 15
Good man bcleugh, thanks.
Is there a recommended torque for tightening the bolts, or just 'good and tight'?
Where did u get your new bolts from?
Thanks
7th Dec 2013 11:08 am
stchris
Member Since: 13 Oct 2013
Location: Warwick
Posts: 335
10 Nm for the bolts
7th Dec 2013 12:47 pm
bcleugh
Member Since: 02 Mar 2013
Location: Newcastle
Posts: 144
bolts just from the dealer when i picked the pan up, cant remember the exact price but saves the hassle of not been able to pull them up, 10 nm sounds right, don't over tighten or you could damage the gasket and have a further leak in the futureD1 200TDI 3 Door (Most expensive Land Rover ever as it got me hooked)
D1 300TDI 5 door
D2 TD5
D3 100,000+ Club
D4 XS
D4 Landmark
7th Dec 2013 1:31 pm
BenDisco3
Member Since: 04 Dec 2013
Location: Scotland
Posts: 15
Thanks to all
Hi,
Sump fitted successfully.
Thanks to everyone in this post, very much appreciated.
Have a great Christmas.
Ben
23rd Dec 2013 10:35 am
Biffysun
Member Since: 09 Jul 2011
Location: Central
Posts: 1788
same to you Ben thats one job off the list so you'll be ready for the next one!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum