Member Since: 11 May 2008
Location: UK
Posts: 6310
one I found is as follows:
655mm long at bottom, 700mm at top.
440mm high, 60mm depth.
The pipes stick out of the intercooler by 125mm.
The brackets on either side stick out by 95mm.
The OD of the two pipes is 2 1/2" (inches).
G
4th Dec 2013 2:10 pm
grahamk
Member Since: 28 Feb 2010
Location: Dumgoyne
Posts: 1473
edit: just saw above post. it is no where near as deep.
4th Dec 2013 2:11 pm
Wildrover
Member Since: 19 Jul 2005
Location: Walkabout
Posts: 628
Does anyone know the size of the D4 intercooler and whether this is an option
I am in on the low cost option 2007 D3 HSE Artic Frost Silverish
Wandering Aussie-Looking for SUN
655mm long at bottom, 700mm at top.
440mm high, 60mm depth.
The pipes stick out of the intercooler by 125mm.
The brackets on either side stick out by 95mm.
The OD of the two pipes is 2 1/2" (inches).
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
4th Dec 2013 2:38 pm
WillyEckerslike
Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967
Wildrover wrote:
Does anyone know the size of the D4 intercooler and whether this is an option
I am in on the low cost option
The D4 3.0 intercooler is about the same size as the air con condenser on the D3. But it has an extra inlet on it for the second turbo. And would be a PITA to fit.
The 2.7 is the same as the D3 intercooler I believe.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
Last edited by beanie on 4th Dec 2013 3:17 pm. Edited 1 time in total
4th Dec 2013 3:12 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6310
might be a PITA to install when curvature of piping is added to the equation in ref to width available there
G
4th Dec 2013 3:17 pm
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1278
Disco_Mikey wrote:
John, any chance you can measure it?
Just been out to the garage, and the intercooler measures 700cm wide at the widest point, and 440 cm deep. The width is 6.9cm, but the actual core is 6cm. Outlet pipes are 6.2 cm.
But this is won't be a low cost option, as these run about £360.
I did read a thread somewhere on the internet, about a guy who did install a RS500 intercooler in a D3. I cannot seem to find it again.
You can see them at proalloy.co.uk
Edit to say that the RS 500 intercooler is built to take a large amount of boost, so has to be welded appropriately. The D3 does not run the same amount of boost, so this construction could be overkill.
Cheers
John
Last edited by John P on 4th Dec 2013 4:41 pm. Edited 1 time in total
Looks to fit on the chassis legs trapped by the bumper, hence a spacer is needed on the outer bolts :?
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
4th Dec 2013 7:45 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
from an 'off road' perspective; wouldn't you leave the original one in place and fab some brackets up to put the new one up in font of the radiator somewhere, only things to sort then would be hoses?and theeeeennn......???
No because you have to connect the hoses to the intercooler - which if the old one was still in situ would then be in the way!Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum