Member Since: 15 Oct 2013
Location: Yorkshire
Posts: 51
FBH parts
Sorry for dragging this up again.
I'm in the process of upgrading my D4 but all the posts I've searched are quite old.
Are there any forum members that can supply me with a receiver (LR00856)
and an antenna (LR08654), think these are the right part numbers?
I already have the remote.
Any help appreciated, thanks.
14th Nov 2013 4:50 pm
cold_n_wet
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
Speak to Pete Bell, he is up your end of sticks.
GlenIDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
15th Nov 2013 7:20 am
Gunny
Member Since: 15 Oct 2013
Location: Yorkshire
Posts: 51
Will do, thanks.
16th Nov 2013 5:23 pm
Mr.Pastry
Member Since: 24 Nov 2010
Location: South Wales
Posts: 484
Ordered the receiver & aerial from Nick (Yeovil Landrover) yesterday for a 2010 Disco4.
Aerial LR008654
Receiver LR036695 (A new part number?)
I got the transmitter from "that auction site" £20.00 inc delivery.
Fitted it this-evening & the transmitter/receiver paired instantly.
Off to the local indy in the morning to get the ccf modified.Mitsubishi Outlander Phev 4H 2018.
Mitsubishi Outlander Phev 4H 2015 - gone.
Discovery 4 HSE - gone.
Discovery 3 S - gone.
Discovery 3 - gone.
Discovery 1 - gone.
Defender 90 300TDI - gone.
Defender 90 200TDI - gone.
Landrover 90 19J - gone.
Argocat 8x8 - gone.
Argocat 6x6 - gone
RR/LR V8 Hybrid 100" - gone.
Rangerover Classic 3.5 - gone.
Series III 2.25- gone.
Series IIa 3.0V6- gone.
Series I - 80" gone.
22nd Nov 2013 11:23 pm
Gunny
Member Since: 15 Oct 2013
Location: Yorkshire
Posts: 51
Thanks for the part numbers.
What was the total cost for the parts out of interest please?
23rd Nov 2013 9:00 pm
Mr.Pastry
Member Since: 24 Nov 2010
Location: South Wales
Posts: 484
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
Mr P,
Was the wiring pretty straightforward? Or do you need to search out the loom?
Is there a mounting plate behind the trim on the rear RHS trim?
Cheers,
G
24th Nov 2013 5:11 pm
Mr.Pastry
Member Since: 24 Nov 2010
Location: South Wales
Posts: 484
There is a place for the receiver. It simply clicks in place.
The connector was there already wrapped in a bit of grey foam.
I fed the aerial cable up to the roof headlining & cable tied it neatly away from the rear pillar airbag.
It's best to completely remove the rear panel.
It is fiddly to get the receiver in if you have big hands though.
I took some pictures & will try to post them later.
There are some pictures already posted somewhere here with a guide how to fit.Mitsubishi Outlander Phev 4H 2018.
Mitsubishi Outlander Phev 4H 2015 - gone.
Discovery 4 HSE - gone.
Discovery 3 S - gone.
Discovery 3 - gone.
Discovery 1 - gone.
Defender 90 300TDI - gone.
Defender 90 200TDI - gone.
Landrover 90 19J - gone.
Argocat 8x8 - gone.
Argocat 6x6 - gone
RR/LR V8 Hybrid 100" - gone.
Rangerover Classic 3.5 - gone.
Series III 2.25- gone.
Series IIa 3.0V6- gone.
Series I - 80" gone.
24th Nov 2013 5:21 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
Pics would be good.
Or a link to where you have seen them. I've only seen one from Wiggs and the car is totally dismantled so quite difficult to orientate things.
24th Nov 2013 5:29 pm
Gunny
Member Since: 15 Oct 2013
Location: Yorkshire
Posts: 51
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
Thanks Mr P. Those are good pics from Wiggs. The one I had found where from further away so not much detail.
Cheers
24th Nov 2013 6:10 pm
Mr.Pastry
Member Since: 24 Nov 2010
Location: South Wales
Posts: 484
Winters coming again.
It's taken a while, but here are some images with her rear os trim off......It's so long ago, I can't quite remember where I stuck the aerial. I think it was above the roof lining near the seatbelt.
Click image to enlarge
[/URL]
[/img][URL=]
Click image to enlarge
[/URL]
Click image to enlarge
[/URL]
[/img]
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mitsubishi Outlander Phev 4H 2018.
Mitsubishi Outlander Phev 4H 2015 - gone.
Discovery 4 HSE - gone.
Discovery 3 S - gone.
Discovery 3 - gone.
Discovery 1 - gone.
Defender 90 300TDI - gone.
Defender 90 200TDI - gone.
Landrover 90 19J - gone.
Argocat 8x8 - gone.
Argocat 6x6 - gone
RR/LR V8 Hybrid 100" - gone.
Rangerover Classic 3.5 - gone.
Series III 2.25- gone.
Series IIa 3.0V6- gone.
Series I - 80" gone.
5th Oct 2014 5:43 pm
northernmonkeyjones
Member Since: 11 Feb 2013
Location: Derby
Posts: 64
This is the thread I was looking for.
I knew I had seen it somewhere. Do you know what has to be enabled in the ccf for the fbh controller to work?
Also can you point me to instructions on how to pair the t91 remote to the reviever? I'm pretty sure I can handle the install in the cubby
7th Nov 2014 7:07 pm
T2BTK
Member Since: 27 Aug 2014
Location: Emigrated (again)
Posts: 182
Ha, just sent you the link to this thread NMJ!
Pairing is simple - just hold the off button on the remote when you connect the receiver and it'll almost instantaneously pair. There are instructions somewhere on here about removing and inserting fuses, but if you do it as you're installing there's no need to.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
