I can't believe this has anything to do with my driving impatience, but is more a fault of the 6-Speed ZF gearbox, and perhaps an age-related (the car that is!) one at that.
In the past few months I've noticed that, when selecting reverse after drive, the gearbox can take a second or two (seems like longer sometimes but it's probably not!) to engage and allow me to actually manoeuvre. As this is certainly a weekly and quite possibly a daily occurrence, I have done my own non-mechanical tests by ensuring that I do let the car stop before selecting reverse and do ensure I maintain pressure on the brake pedal before moving from drive to reverse.
The car was first registered in July 2011, is a MY11 and has 86k miles on the clock. I'm the second owner but it's always been main stealer serviced/maintained and on time.
So, anyone else experienced this with the 6-Speed (or even 8-Speed) box?
Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
29th Jul 2015 1:22 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Only seen that on a 6-speed with a linkage that needs lubricating.
Land Rover - Turning Drivers into Mechanics Since 1948
Is lubricating the linkage as easy as fitting the rear ladder or emptying the ashtray Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
29th Jul 2015 1:40 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Somewhere between the ladder and the ashtray.
Land Rover - Turning Drivers into Mechanics Since 1948
Guessing it's a good read of Disco_Mikey's thread then. Am I lubricating the component that appears in the second pic down in his wiki - http://www.disco3.co.uk/forum/topic31656.html ?Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
29th Jul 2015 1:53 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20786
Mine was always the same, seemed to take a few seconds to (what felt like) build pressure and engage drive/reverse
New box is the same, though not as pronounced, but can still catch out 1St gear if you are too quick with the throttle pedal...My D3 Build Thread
Thanks Disco_Mikey. Was I right in thinking the gear linkage is the component shown in pic 2 of your wiki? And if I am lubricating it, what lubricant should I use and what exactly am I lubricating (the shaft or linkage components themselves)?Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
30th Jul 2015 9:49 am
Kingmav66
Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349
Isn't reverse selection delayed as standard, so when going from park to drive it doesn't engage?
30th Jul 2015 10:00 am
CFB
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
Did lubricating that linkage sort it?
Mine did this to me today, trying to do a 3 point turn and no drive in reverse for a couple of seconds followed by a slight shudder and then we started to move. Was a bit unnerving at the time as I was casuing a minor obstruction 2020 BMW X1 18d XDrive X-Line Auto
4th Feb 2016 11:39 am
Perdi's Dad
Member Since: 04 Sep 2013
Location: Hertfordshire
Posts: 188
Mine is the same age as the op. And mine does this. I reverse up a gradient to get on my drive and it feels like it is slipping or not engaging very quickly. Last night I had no drive in reverse and had to go back to park then r and then I had drive. My d3 never did this.
My d4 has 1 previous owner to me and 60000 on it
Is this likely to be the linkage?Upgrades so far - , rear ladder from prospeed , front and rear light guards G4 style roof rack and 4 lightforce spots on the rack! Xenon lights
Mine did this to me today, trying to do a 3 point turn and no drive in reverse for a couple of seconds followed by a slight shudder and then we started to move. Was a bit unnerving at the time as I was casuing a minor obstruction
I have to admit to never getting around to trying or doing this I'm afraid. Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum