With the air intake being located on the side of the vehicle, it seems like it wouldn't be a good idea to run the LR3 through a car wash. What have others done? Is it ok to do this? I worry that the high pressure water from the car wash would be forced into the intake. Any comments appreciated. Thanks[/code]
1st Dec 2006 12:08 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
Don't worry, its perfectly ok. There is a long perforated pipe to the airbox, then a large sump trap in the airbox before any water can get near to the engine. You could blast a hose in there and it would be fine.
Hmmm, there isn't a pipe on all D3s, just a channel between the inner and outer wings and it should be noted that the manual does say don't spray water directly into the intakeThe End
1st Dec 2006 10:00 am
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
If the engine wasn't running, there wouldn't be an issue, i'd be wary of carwashes & hosepipes with the engine turned on
1st Dec 2006 10:12 am
angrd020
Member Since: 14 Dec 2005
Location: Branford
Posts: 148
I have been taking my LR3 though the power nozzle touchless carwash at least every week for the past year and 3 months and have had no issues so far. The wash I take it through has quite alot of water pressure coming out of those hoses! My D3 likes to be clean during the week, the weekend is another matter. BTW - I wash it when in off-road height.
ALR2005 Tonga Green Land Rover LR3(Yes I wheel it!!!)
2002 Shale Green Jeep WranglerX(Yes I wheel it!!!)
1994 Red Jeep Cherokee (Use it as a spare vehicle)
DO IT! DO IT NOW!!!
10th Dec 2006 5:53 am
lee01277
Member Since: 06 May 2005
Location: Shed
Posts: 821
Only found one carwash in my area the D3 will fit in !..............Somewhere in-between my old D3 and what's to come next .........
10th Dec 2006 6:11 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10442
Although I do a lot of 4x4ing and the paint gets a hard time, I would never take my car through a standard car wash.
10th Dec 2006 6:20 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Yep me too - standard car washes are for standard sized carsSteve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
10th Dec 2006 8:40 pm
angrd020
Member Since: 14 Dec 2005
Location: Branford
Posts: 148
Carwashes here are designed with the SUV and Trucks in mind. The one I use has a clearance height of 6Ft 9Inches. This one even cleans the wheels with automatic brushes! Very Nice!2005 Tonga Green Land Rover LR3(Yes I wheel it!!!)
2002 Shale Green Jeep WranglerX(Yes I wheel it!!!)
1994 Red Jeep Cherokee (Use it as a spare vehicle)
DO IT! DO IT NOW!!!
11th Dec 2006 12:54 am
Peter C
Member Since: 11 Dec 2006
Location: Moraga, CA
Posts: 14
Paint finish stands up to drive through Car Washes?
A fellow I do business with claims that the drive through car washes use too strong of a soap and I should not use them on my 2006 LR3. How are your finishes holding up, say the 2004 or 2005 LR3s tha may have been run through these type car washes a lot of times over the last few years.
The fellow also said he would put a protective coat of stuff on my paint for only $75.00; I might do this unless for some reason this is not a good idea.
Also, looking for a good shop to add goodies to my new vehicle in the San Francisco area, especially a shop anywhere from say Benicia to Livermore, or Oakland,,,that general area. Any input from anyone?2006 HSE, Rimini Red, Heavy-Duty package (locking rear differential and full size spare), Luxury Package (Cold Climate package, Cooler Box with Adaptive front-Lighting)
Don't know any shops in the East Bay - I have been putting on the extra's myself. How do you your new LR3?
30th Dec 2006 10:00 pm
Peter C
Member Since: 11 Dec 2006
Location: Moraga, CA
Posts: 14
I like it a lot. A lot more comfortable for my wife than the Discovery 1 we had years ago.
By the way, I have posted in a number of forums here about my search for a way to make my passenger mirror a power folding one, since my garage is so narrow. I emailed a UK dealer a week ago and still no answer. They are power in the UK and some other countries around the world. I have had an indication that the wiring harness is the same for our USA models so I think I just need the actual mirror unit.2006 HSE, Rimini Red, Heavy-Duty package (locking rear differential and full size spare), Luxury Package (Cold Climate package, Cooler Box with Adaptive front-Lighting)
Re: Paint finish stands up to drive through Car Washes?
Peter C wrote:
Also, looking for a good shop to add goodies to my new vehicle in the San Francisco area, especially a shop anywhere from say Benicia to Livermore, or Oakland,,,that general area. Any input from anyone?
I just found this place in Redwood City - don't know anything about them though.
Hi All,
Paintwork,paintwork,paintwork & paintwork. The No 1,2,3 & 4. Reason I don't do automatic carwashing. Their brushes are full of from the previous cars and can be very harsh at the cleanest. I only use Auto-Glym products and my own lambs-skin mitt at a go around yourself carwash. I hope in 5-10 years my time, effort and money (each product over $35 Australian [ 24p U.K. or U.S.$1.20]) will pay off with still gleaming paintwork.
Cheers & Regards,
David.Did you think I would leave you crying,
When there's room in my D3 for 7,
Climb in here Joe we'll soon be flying,
I can go just as fast with 7.
2005 TDV6 S with Terrain Response (& all that entails), Tasmods (gorn). 2008 TDV6 HSE (gone). A Dark Side umbrella (here) & car (here).
Member Since: 14 Dec 2005
Location: Branford
Posts: 148
Re: Paint finish stands up to drive through Car Washes?
Peter C wrote:
A fellow I do business with claims that the drive through car washes use too strong of a soap and I should not use them on my 2006 LR3. How are your finishes holding up, say the 2004 or 2005 LR3s tha may have been run through these type car washes a lot of times over the last few years.
The fellow also said he would put a protective coat of stuff on my paint for only $75.00; I might do this unless for some reason this is not a good idea.
Also, looking for a good shop to add goodies to my new vehicle in the San Francisco area, especially a shop anywhere from say Benicia to Livermore, or Oakland,,,that general area. Any input from anyone?
I have not seen any paint issues so far, but then I like to place peanuts on my hood for the Seagulls to eat!
ALR2005 Tonga Green Land Rover LR3(Yes I wheel it!!!)
2002 Shale Green Jeep WranglerX(Yes I wheel it!!!)
1994 Red Jeep Cherokee (Use it as a spare vehicle)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
BTW - I wash it when in off-road height.
| 08MY Discovery 3 (history) 
The one I use has a clearance height of 6Ft 9Inches. This one even cleans the wheels with automatic brushes! 
Very Nice!
from the previous cars and can be very harsh at the cleanest. I only use Auto-Glym products and my own lambs-skin mitt at a go around yourself carwash. I hope in 5-10 years my time, effort and money (each product over $35 Australian [ 24p U.K. or U.S.$1.20]) will pay off with still gleaming paintwork. 
