Ray Abraham
Member Since: 03 Jun 2010
Location: Johannesburg Gauteng
Posts: 4
|
Installing fog lamps into an "s" bumper |
|
I have a disco 3 v6 s that did not come out with built in front fog lamps. Has any one every installed original fog lamps into an "S" model bumper
|
3rd Jun 2010 9:08 pm |
|
|
pa28pilot
Member Since: 08 Mar 2009
Location: Lancashire
Posts: 204
|
I fitted mine some months ago and ordered fog lights and light switch from land rover.
You will have to remove the whole of the front bumper and the arch trim including front mudflaps if you ahve them on. Cut out the holes for the lights. The light switch will have to be replaced with a switch that has a selector for front and rear fogs. There are a number of post on how to remove the bumper ect abit fiddly but manageable.
Good luck
Don't be blinkered vision, see the world in colour.
|
3rd Jun 2010 9:27 pm |
|
|
Ray Abraham
Member Since: 03 Jun 2010
Location: Johannesburg Gauteng
Posts: 4
|
That is great to hear. Are there monting points behind the bumper to house the lights.
|
3rd Jun 2010 9:33 pm |
|
|
pa28pilot
Member Since: 08 Mar 2009
Location: Lancashire
Posts: 204
|
Yes the kit com with all the screws ect needed for the job but light switch will have to be ordered seperately. Don't be blinkered vision, see the world in colour.
|
3rd Jun 2010 10:06 pm |
|
|