Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

how do you get them out
Post Reply  Down to end
Page 1 of 1
dave-rsvr
 


Member Since: 04 Sep 2007
Location: beds
Posts: 134

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3
how do you get them out

i am going to be fitting side bars soon and have seen that you have to remove 7 plastic clips or what ever they are that holds the plastic side trim on.
how do you get them off,or is it a case of break them and get some new ones?
thanjks
dave
  
Post #2125566th Oct 2007 6:44 pm
View user's profile Send private message View poster's gallery Reply with quote
mick
 


Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049

England 2010 Discovery 4 3.0 TDV6 GS Auto Santorini BlackDiscovery 4

if you check out the threads from chesters he might help as he took his side steps off recently or RLD as he has taken the sills off.
  
Post #2125686th Oct 2007 7:29 pm
View user's profile Send private message View poster's gallery Reply with quote
Googsy
 


Member Since: 06 Aug 2007
Location: Celbridge, Co Kildare.
Posts: 853

Ireland 

Hi did this recently with the kind assistance of Discowex you just pull off the strip the clips should come away intact with strip.
 Googsy
2008 HSE TDV8



Beauty is in the eye of the beer holder... 
 
Post #2126707th Oct 2007 12:06 am
View user's profile Send private message View poster's gallery Reply with quote
chris ace
 


Member Since: 10 May 2007
Location: ESSEX
Posts: 63

England 2008 Discovery 3 TDV6 SE Auto Stornoway GreyDiscovery 3

Hi Dave, its very simple to do, if you look at the clips you will see a small flat on either side of the head. I simply used a large flat screwdriver and gently levered downwards on the inner circular head. You will see that the inner round bit starts to slide out of the remaining part. Just pull with your fingers and the inner part will come out, sometimes with the outer part as well. Then the remaining outer part can be levered out the same. When I say levered, you can almost pull these out with your fingers. You will need a very short crosshead screwdriver to remove the 2 screws at the rear of the trim by the rear wheels. When you pull the trim off, you will also find it leaves a row of yellow fixings. I found it better to remove these with pliers and a small screwdriver and refit them to the side trims before refitting it all back together. If you have any problems, PM me for my phone number and I will talk you through the stages as you do the work, all the best, Chris.
  
Post #2126937th Oct 2007 8:49 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
RLD
Uncle Ray 


Member Since: 18 Jul 2005
Location: all ways some where
Posts: 11928

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

Use a slightly bent fork screw driver and lift the plastic middle cap out and the the lot will come out
 Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!" 
 
Post #2126977th Oct 2007 9:07 am
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site