Member Since: 06 Oct 2006
Location: KENT
Posts: 4692
Fitting RAI and ladder
Is there any tips/tricks for fitting the RAI and ladder, or is it straight forward
29th Dec 2008 11:02 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50977
The ladder fits on the back and the RAI on the side Don't get the two confused OK 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
29th Dec 2008 11:04 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3654
1996 Discovery 1 300TDI ES Biarritz Blue, sold
1999 Discovery 2 TD5 ES Rioja Red, sold
2002 Discovery 2 TD5 ES Buckingham Blue, sold
2005 Discovery 3 TDV6 HSE Adriatic Blue, sold
2006 Discovery 3 TDV6 HSE Zambezi Silver, sold
2011 Discovery 4 SDV6 HSE Nara Bronze, sold
2016 Volvo XC60 D5 AWD Lux Nav Twilight Bronze, sold
2020 Range Rover Evoque P250 First Edition, Nolita grey, sold
2023 Range Rover Evoque P300e Autobiography, Carpathian grey
Glynne, it's not be done for a while but it's been known for RAI and such like to get fitted at the SE Pub meet - might be worth a trip LRs are a fond memory, apart from the maintenance.
29th Dec 2008 11:05 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Very easy, turn up to a SE meet and BEG
29th Dec 2008 11:05 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4692
Yer I can catch up with DG then
29th Dec 2008 11:06 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Sounds like a tradition is starting
29th Dec 2008 11:07 pm
Shrinky
Member Since: 05 Jul 2007
Location: Cotswolds
Posts: 2515
Before everyone drinks too much. Or it might be on the back Global Warming.... I'm luvvin it
29th Dec 2008 11:07 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4692
Shrinky wrote:
Before everyone drinks too much. Or it might be on the back
He just said it goes on the back
29th Dec 2008 11:08 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50977
GLYNNE wrote:
Yer I can catch up with DG then
Why ? ...was my first hint \ tip not clear enough that you want me to show you
Last edited by DG on 29th Dec 2008 11:09 pm. Edited 1 time in total
29th Dec 2008 11:08 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
top men KEN, DG, SLIMER, XTC and the gang. it was my 1st meet and took alot of micky taking from the forum before the planned fitting.
Was all done in the dark by the guys and really made me get onto the modifications
29th Dec 2008 11:09 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4692
You got it
29th Dec 2008 11:09 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50977
I'm sure that we could arrange a "fitfest" 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
29th Dec 2008 11:15 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4692
DG wrote:
I'm sure that we could arrange a "fitfest"
Are you including EGR blanking plates Not for me
29th Dec 2008 11:20 pm
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
Hi Glynne,
I fitted a RAI the other day on my D3....fitment is straightforward but tricky if you don't have the correct riv-nut tool or you haven't done without one before.
I used some spare nuts + bolts and a few spanners to compress them and it worked ok, but is slightly unnerving.
Don't forget that you need a 9.5mm drill bit for the riv-nuts - not a 7mm bit as per the LR instructions. You'll also need a 16mm drill bit for the A-trim pillar or just use the 9.5mm one and waggle it around a lot.
Good luck 2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Don't get the two confused OK 
