Member Since: 28 Feb 2012
Location: Kent
Posts: 271
Engine only starts on second pressof start button
This used to happen intermittently, but now seems to happen every time I attempt to start. Dash lights up, but engine doesn't start. On the second attempt all works well.
Could this be a dodgy switch on the brake pedal? Any other suggestions?
23rd Jan 2016 5:20 pm
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7438
I noticed the same thing on mine recently and then realised it was simply the delay while the glow plugs did their thing on cold mornings. Could that possibly be it?2011 - 2015: 3 x FL2
2015 - 2017: 2 x D4
2017 to date: FFRR SDV8
2023 to date: FL2 as a second car
2021 to date: Hinckley built ‘14 Triumph Trophy 1200
2022 to date: Hinckley built ‘14 Triumph Trophy 1200 & sidecar!
(One of only two known to exist in the world!)
23rd Jan 2016 6:52 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Depleted servo power, so just press harder on the brake.
Land Rover - Turning Drivers into Mechanics Since 1948
Check the battery terminals. Even though they may be tightened up fully, you may be able move them by hand. If so, undo fully and spread the gap at the end of the terminal, so the clamp grips the battery post harder.
Could also be the starter motor on the way out. Mine died last weekend while offroad, at 4.5 years old and 130,000km.
4th Feb 2016 10:27 am
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 271
Tried pushing harder on the pedal, seems to make no difference. If I keep hold of the button for ages, still no start, until I turn it off and then on again.
I'll have a look at the battery clamps and see if that helps.
Thanks all.
4th Feb 2016 11:19 am
alexani15
Member Since: 04 Nov 2015
Location: lagos
Posts: 11
I have the same issue on mine a 2010 HSE. Its been like that for a while and i tried the battery trick but it dosent seem to work,pressed harder on the brake pedal and that also hasn't worked. Any more
suggestions?
27th Mar 2016 7:04 pm
alexani15
Member Since: 04 Nov 2015
Location: lagos
Posts: 11
I have the same issue on mine a 2010 HSE. Its been like that for a while and i tried the battery trick but it dosen't seem to work,pressed harder on the brake pedal and that also hasn't worked. Any more
suggestions?
27th Mar 2016 7:05 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
I think Robbies winding you up a tad - all it needs is the electrical circuit to be completed in the brake pedal.... Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
