DISCO3.CO.UK - View topic - Disco 4 Diesel restricted performance

Nicknack

Member Since: 21 Sep 2017
Location: Perth
Posts: 2

2011 Discovery 4 3.0 SDV6 SE Auto Alaska White

Disco 4 Diesel restricted performance

Hi All

Im the proud owner of a disco 4 sdv6se 3ltr 2011. I ve had the car for 2 yrs, bought with 90,000 kms now has 153,000 kms (still under 100,000 miles). Love it have had a few small maintanence things along the way but all good until now!! Had a restricted performance warning appear, just now and again, stopthe car and more often than not it clears and things are back to normal.
I ve taken the car to a dealer here in Australia to test the fault and he s come back saying the intake manifold is cracked there plastic I now relise. They say its a top off job i.e. the chassis is disconnected from the body and its lifted off the do the work. They want $4,000 this is over 2k in stirling. I was hoping that someone had missed a recal by land rover or something but this isnt the case.
Any advice would be good

Cheers

Nick

21st Sep 2017 9:07 am

alfamale

Member Since: 25 Jul 2011
Location: Stroud, Gloucestershire
Posts: 2185

2011 Discovery 4 3.0 SDV6 XS Auto Zermatt Silver

Plenty of talk on the forum about this, just use the search function.

Here's my post: http://www.disco4.com/forum/topic135678.ht...erformance

Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.

21st Sep 2017 9:14 am

alfamale

Member Since: 25 Jul 2011
Location: Stroud, Gloucestershire
Posts: 2185

My original post was for the o/s inlet manifold, which went at about 90k miles. The n/s went recently too, at about 112k miles.

Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.

21st Sep 2017 9:17 am

1967jester

Member Since: 05 May 2010
Location: Usually in the North East though I have been known to travel
Posts: 4483

2015 Discovery 4 3.0 TDV6 HSE Lux Auto Fuji White

Rob Penrose had issues, think it was as a fuel filter, he's best to confirm Paul.

06 Java Black HSE - gone
12 Baltic Blue HSE - gone
15 Fuji HSE Lux
Club Biscuits, mmmm nice!
Traxide/Luna hybrid & Yellow top
Some Prospeed bits
+ some other stuff
Club N.E.R.D.s.

21st Sep 2017 10:08 am

adam

Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917

Have they tested it for leaks? - my RP turned out to be an O ring on the inlet pipe leading to the manifold and a faulty MAP sensor - about £60 all in and a few minutes to fit (though it took ages to find until they did a smoke pressure test)

21st Sep 2017 11:09 am

robpenrose

Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138

2010 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey

Are you actually getting any drop in performance or just the message? Is it an orange triangle or red on the dash?

I did have a intermittent restricted performance message as Paul said. I had no drop in performance with or without the message (orange triangle on dash). The garage sorted it with a replacement fuel filter housing, which seems to be a fairly common. - Easily DIY I think as well. But I assume the fault code pointed towards this at the time (I didn't have my IID at the time though, so not sure what the fault code actually said).

Maybe one other thing to check is the turbo/compressor shut off valve isn't seized or sticking. My father has a D4 as well and he just had this on his, and I think mine had it previously as well.

If they say its cracked, it should be easy enough to see surely? Take the acoustic engine cover off and get them to show you or have a look yourself. If its a cracked inlet manifold, there is a TSB out for it, so you could maybe try for good will from LR.

I also don't think its a body off job, but haven't had it done, so cant be sure. A few guys on here have, so hopefully they can advise.

Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES

21st Sep 2017 11:25 am

alfamale

Member Since: 25 Jul 2011
Location: Stroud, Gloucestershire
Posts: 2185

As Rob says above, if it is inlet manifold it should be easily spotted by the misting.

This is what my n/s looked like when I removed the cover:

Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.

21st Sep 2017 11:45 am

Mr.Pastry

Member Since: 24 Nov 2010
Location: South Wales
Posts: 483

Hi Nick.

A few of us here have had our plastic inlet manifolds replaced free of charge by Landrover.
It is an "Inherent Manufacturing Fault" after all.
Cause: Material thickness and fillet radius of the valve cover not to specification.

No need to remove the body.

Technical service bulletin here:

http://www.disco3.co.uk/gallery/albums/use...0768v2.doc

Click image to enlarge

Mitsubishi Outlander Phev 4H 2018.
Mitsubishi Outlander Phev 4H 2015 - gone.
Discovery 4 HSE - gone.
Discovery 3 S - gone.
Discovery 3 - gone.
Discovery 1 - gone.
Defender 90 300TDI - gone.
Defender 90 200TDI - gone.
Landrover 90 19J - gone.
Argocat 8x8 - gone.
Argocat 6x6 - gone
RR/LR V8 Hybrid 100" - gone.
Rangerover Classic 3.5 - gone.
Series III 2.25- gone.
Series IIa 3.0V6- gone.
Series I - 80" gone.

21st Sep 2017 12:56 pm

Nicknack

Member Since: 21 Sep 2017
Location: Perth
Posts: 2

When the fault appears on dash im getting the triangle in red with restricted performance on the digital display and also the power is restricted although this has been intermitent more often than not theres full power but the triangle stays on.

23rd Sep 2017 12:46 pm

Holmkiern

Member Since: 16 Jul 2017
Location: Upphärad,west coast
Posts: 65

2011 LR4 3.0 TDV6 HSE Auto Unknown Colour

Attachment not aviable. Any one The bulletin and can svaret it?
Thanks

11th Jun 2024 3:43 pm