FidoNick
Member Since: 18 Jan 2021
Location: Purton, Wiltshire
Posts: 131
  
|
Yes, your right about the sensor being only on one wheel. From an engineering perspective I can understand why that's a sensible thought, but from a practical perspective there's a lot of assumptions bring made!
Having just read the brake Bible I feel confident enough to change whatever pads need changing (if they do need a change), so long as I can find suitable axle stands.
|
 11th Apr 2021 7:00 am |
|
|
Ivan
Member Since: 01 Mar 2011
Location: Malvern Worcestershire
Posts: 690
|
To eliminate the sensor, cut the wires to the sensor (from the sensor lead) and join them together. 2013 RR Vogue SE SDV8
2013 Freelander 2 HSE Luxury SD4
|
| 11th Apr 2021 7:23 am |
|
|
FidoNick
Member Since: 18 Jan 2021
Location: Purton, Wiltshire
Posts: 131
|
Good to know for the future.
|
| 11th Apr 2021 12:29 pm |
|
|
FidoNick
Member Since: 18 Jan 2021
Location: Purton, Wiltshire
Posts: 131
|
FidoNick wrote:
Just a thought (and resurrection of an old post...). If I removed the relevant sensor wire, would that stop the warning & 'ding'? 
I'm grateful for the warning, but with a low number of miles to do before I had time to get the pads replaced, I don't want to be reminded every 30 seconds....
And SHMBO is bound to panic if she sees the warning 
I suppose I could go and check myself, but it's just started raining... 
After a few miles, the annoying intermitteent 'ding' has disappeared, to be replaced with a constant amber on the dash. I'm guessing the random interruptions was due to the sensor intermitently being caught as the disc was wearing through. A hundred or so miles later and the intermittency has disappeared, so no longer annoying, but remains useful with the warning light on the dash. Interestingly (for me) the 'tick-tock' of the indicators got muted to make way for the 'ding'. Whodathought!
I'll check pads all round later today, hoping I don't need to remove road wheels to do so.
|
| 13th Apr 2021 1:56 pm |
|
|
