My original post was asking about these.An honorable defeat is better than a dishonorable victory.” ― Millard Fillmore
2006 Disco 3
Gas Gas 300ec / Gas Gas tx249 / Bandit 1250
XR 650r / Pajero 2.8 Lifted and Safari Snorkel-gone.
3rd Sep 2017 6:40 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
D&G wrote:
DG wrote:
Doesn't need any of that ...the RAI is for air not water ...even if you fit a airtight snorkel you wouldn't want water above the bonnet for anything other than a very short length of time.
But I think the video shows that an RAI is fairly useful when wading
So the diff etc has raised air in takes or one way valves?
there are raised breather pipes that are factory fitted to the , diffs , transfer and gearbox
they terminate right at the back of the engine on the bulkhead
when i fitted the new front diff modified breather i did extend it, with a 6mm pushfit coupling then plastic pipe onto under the spare battery cover ,
Last edited by gstuart on 3rd Sep 2017 6:44 pm. Edited 1 time in total
3rd Sep 2017 6:41 pm
D&G
Member Since: 29 Jun 2017
Location: Charente 16480
Posts: 3483
Thank you gsstuart. An honorable defeat is better than a dishonorable victory.” ― Millard Fillmore
2006 Disco 3
Gas Gas 300ec / Gas Gas tx249 / Bandit 1250
XR 650r / Pajero 2.8 Lifted and Safari Snorkel-gone.
3rd Sep 2017 6:43 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
D and G no probs
this is where i fitted the modified front diff breather , can see it at the back with the 90 degree bend
3rd Sep 2017 6:49 pm
D&G
Member Since: 29 Jun 2017
Location: Charente 16480
Posts: 3483
Cool, 8)
Not that I will be doing much wading. I like the D3 too much. I have even cleaned it.
The shogun didn't really get to me in the same way. It was a great work horse and went pretty much everywhere that I wanted to go.An honorable defeat is better than a dishonorable victory.” ― Millard Fillmore
2006 Disco 3
Gas Gas 300ec / Gas Gas tx249 / Bandit 1250
XR 650r / Pajero 2.8 Lifted and Safari Snorkel-gone.
3rd Sep 2017 6:55 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979
Ref the diffs ...I meant that you don't need to add anything
The OEM RAI is not a sealed unit, it doesn't give you any additional wading capability
3rd Sep 2017 7:02 pm
D&G
Member Since: 29 Jun 2017
Location: Charente 16480
Posts: 3483
DG
I guess the electronics get killed these days. I just put the bits that were at risk in small tupperware boxes seal each end.
It was the 2.8 Shougun, so not a lot in the way of ECUs.
Them were the days, I even waded with an old Ford escort diesel van when we got flooded around Edenbridge many many years ago.An honorable defeat is better than a dishonorable victory.” ― Millard Fillmore
2006 Disco 3
Gas Gas 300ec / Gas Gas tx249 / Bandit 1250
XR 650r / Pajero 2.8 Lifted and Safari Snorkel-gone.
3rd Sep 2017 7:03 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
useto work round Edenbridge , for kent domestic oil boilers
plenty of the roads useto flood round there
3rd Sep 2017 7:52 pm
nerdbiker
Member Since: 24 Apr 2017
Location: London
Posts: 20
They should have used an open top jeep, rather than wasting a D4!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
