| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
daimlermg
Member Since: 31 Jan 2010
Location: N Yorks
Posts: 140
  
|
| Alarm going off every few days |
|
Alarm going off every few days
I only use the single lock and not the internal movement alarm ( second press on button / door handle
The alarm will sound for 10 to 15 seconds every 3 to 7 days. Day time and sometimes at night.
All doors are closed and the sunroof is closed, the alarm sets with the bleep sounding to confirm it is set
Battery fully charged
Any one else get this or have any thoughts? Faultmate MSV-2
500,000 plus miles in RR,s and trying for more without breakdowns this time 
Gone Lexus RX400h SE
Past Audi A6 avant Qutro
Toyota Supra
Long line of RR's
Had for 40 years but now gone 1935 Daimler and 1937 MG
|
 12th Jun 2011 4:30 pm |
|
|
dtest
Member Since: 02 Jan 2011
Location: Weybridge
Posts: 140
|
Spider in the car...seriously
|
| 12th Jun 2011 4:32 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26776
|
Mine does not beep when the alarm is set 
If I leave a door open, or the bonnet/tailgate open, then it beeps to warn me. Maybe you have a faulty door/bonnet/boot switch that is telling the system a door has been opened?
|
| 12th Jun 2011 5:37 pm |
|
|
devonchilliman
Member Since: 03 Nov 2008
Location: Devon
Posts: 5224
|
Mine doesn't bleep either when alarm is set ,as Gareth said only if something isn't closed properly  Www.devonchilliman.co.uk
|
| 12th Jun 2011 5:59 pm |
|
|
daimlermg
Member Since: 31 Jan 2010
Location: N Yorks
Posts: 140
|
Thanks Guys
You are right there is no bleep (my fault) It the mirrors that fold back and the indicators that flash.
As the inside movement detector is not on with the first click can it be a spider? If so where do I start to look and clean with the vacuum Faultmate MSV-2
500,000 plus miles in RR,s and trying for more without breakdowns this time
Gone Lexus RX400h SE
Past Audi A6 avant Qutro
Toyota Supra
Long line of RR's
Had for 40 years but now gone 1935 Daimler and 1937 MG
|
| 12th Jun 2011 7:31 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26776
|
Personally, as its a D4 under warranty, I would let the dealer worry about the spiders.
|
| 12th Jun 2011 8:33 pm |
|
|
mzplcg
Member Since: 23 Jun 2009
Location: Gone
Posts: 1087
|
daimlermg wrote:As the inside movement detector is not on with the first click can it be a spider?
Isn't it the other way around ?? I always thought the 2nd press within 5 seconds was the one to DISABLE the internal motion sensor. i.e. one press means all systems are enabled. That is certainly the case with my FFRR 'cos I have to use this feature when I have the dogs in the car.
Oh, and spiders live behind the A pillar trims in mine. Quite endearing but never set the alarm off though.
Dom
|
| 13th Jun 2011 6:37 am |
|
|
Splitpin
Member Since: 30 Dec 2010
Location: At the toolbox
Posts: 535
|
I thought the same, 2nd press to disable sensors
|
| 13th Jun 2011 7:05 am |
|
|
MJIbex
Member Since: 13 Sep 2009
Location: Reading
Posts: 195
|
Everyone is right because the D3 & D4 are different.
For D3
2 push - basic lock and perimetric sensors.
1 push - as per 2 push + deadlock and interior sensors.
For D4
1 push - basic lock and perimetric sensors.
2 push - as per 1 push + deadlock and interior sensors.
D4 also has the ability from the menu to disable all sensors which includes tilt sensor, for things like the ferry.
Mark
|
| 13th Jun 2011 10:24 am |
|
|
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3654
|
The locking system on the D4 works the opposite way around to the D3, 2nd press activates the interior sensors and the deadlocking system.
Edit, need to type faster 
MJIbex wrote:Everyone is right because the D3 & D4 are different.
Being pedantic here  but as this was posted in the D4 section they weren't 
Last edited by WOODY179 on 13th Jun 2011 1:27 pm. Edited 1 time in total
|
| 13th Jun 2011 10:29 am |
|
|
ilron
Member Since: 18 Jul 2009
Location: By the sea west of the mountains
Posts: 96
 
|
I have also experienced the fault described in the first post.
The alarm went off every now and then, without no apparent cause. It has done so in both locking scenarios.
I mentioned it to the dealer and they said there was a newer version of the alarm software but they had no clue if that actually addressed the problem. I have however not had any problem with the alarm since the update, but there never was a logic to the problem in the first place so there really is no sure way to test if the problem is gone or not. Time will show, so far so good.
|
| 13th Jun 2011 10:34 am |
|
|
anglofrog
Member Since: 08 Feb 2007
Location: in the hills among the trees and fields
Posts: 102
|
i had this   it was due to wd40 being used on the bonnet catches  acts as insulation as and when  do not let anyone lub near the alarm contacts  Doing my best on the red wine lake, as its good for the heart
my other 4+4 is a real tractor but not as much fun on road
|
| 10th Jul 2011 9:15 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
