Just finished fitting my Philips Daylight 4 DRL's as sharky said (in this thread http://www.disco4.com/forum/topic90688.html ) they are easy to fit...... Once the brackets have been adapted to fit on the curved bumper!!
But all done and dusted, good tip re the live in the plug behind the grill, my FBH also messed about with the DRL's so moved the live to there. I guess there is an earth there too but ended up leaving that to the battery. Ill post some pics once the snow has gone!
Skep'16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
22nd Mar 2013 11:24 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
i got the angle on mine right by packing out with some washers !!MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
I stuck on some small bits of triangular rubber to the leading edge, managed to get the right angle 1st time
Hardest bit was trying to work out if they were both at the same angle! Lined them up on a board and both shined at the same level anyway!
Click image to enlarge
Skep'16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
22nd Mar 2013 9:18 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Looks good Skep and very familiar
MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
Yup credit definately has to go to you for the location and wiring tips!! You should take a commission as I'm sure there'll be plenty more doing similar!
Cheers again Sharky
Skep'16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
22nd Mar 2013 9:56 pm
Khauff
Member Since: 05 Apr 2008
Location: Scotland
Posts: 229
Looking good Skep
23rd Mar 2013 9:27 am
RichardB
Member Since: 04 May 2010
Location: Hants
Posts: 485
I got a set of those Philips DRLs in a box awaiting fitting. I'd be very interested in where exactly that live feed is.
If you remove the grill and look infront of the rads, to the right of the horns there is an unused plug which is fastened to the cross member, pull it off the clip and take the end off the plug and use a multimeter or tester to test the pins with the engine running. All the wires are the same but 1 come live with the engine. I just spliced into this wire and hey presto! If you ain't got a multimeter or tester ill whip my grill off and find out which wire it is.
Skep'16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
23rd Mar 2013 11:17 pm
RichardB
Member Since: 04 May 2010
Location: Hants
Posts: 485
Thanks for the info. I think I have the plug but... realised that where you have mounted your lights isn't available to me as I've underbody protection fitted and there is now a solid piece of 8mm alloy sitting just in the way there.
Back to the drawing board
EDIT: Having spent a while looking, I don't think I will be fitting these as the place under the bumper isn't available to me and the other options are a bit more complicated and I don't want to get into that.
So for anyone looking for a bargain, will be shortly going into the For Sale Section.
29th Mar 2013 2:07 pm
nasdiesel
Member Since: 21 May 2012
Location: Newburyport
Posts: 17
Did you look at mounting them in the stock location? Would the existing brackets work?'97 NAS D-90 - 2.8tdi with ZF
'12 LR4 V8 - HSE w/climate, vision, rear locker, Logic 7, RMR, Sat
29th Mar 2013 8:51 pm
RichardB
Member Since: 04 May 2010
Location: Hants
Posts: 485
Yes I did. Thought about it for a while but it requires making permanent cuts into the bumper and I didn't really want to go that way.
29th Mar 2013 11:01 pm
Nottsman
Member Since: 19 Jun 2009
Location: East Midlands
Posts: 35
These look good and cost far less than the OEM kit.
Has anyone on here managed to fit them in the stock position on a D4 ? (where the OEM ones are meant to go in the recess in the black plastic part of the bumper below and directly in line with the fog lamps.)2010 D4 TDV6 HSE - Nara Bronze
2012 RRS SDV6 HSE Lux - Sumatra Black
2008 D3 TDV6 XS (Stornoway) - Gone & missed
I am sure someone has done this, but involves taking off the bumper and plenty of cutting and glueing....... Ill have a look see if i can find it......
Skep'16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
2nd Apr 2013 8:47 am
DarkAether
Member Since: 05 Sep 2012
Location: Maryland
Posts: 1
Skep wrote:
I am sure someone has done this, but involves taking off the bumper and plenty of cutting and glueing....... Ill have a look see if i can find it......
Just a quick note for something to watch out for, I was following a car yesterday and happen to notice that the LED's were turning off and on, not quickly, but would go off for a couple of seconds every 15 to 20 seconds or so and in no correlation to the road, bumps/corners etc. Still not sure why, but have moved the Wiring back to the battery as the FBH isn't used at the moment and gave the sidelight splice clamp a squeeze and all seems ok now, so doesn't seem to be the controller. Does anyone know what the positive wire behind the grill does, could this be being affected now the weather has warmed up, maybe related to Air Con or an additional Fan for warmer climates?
Just a thought and something for those using that wiring location to watch out for.
Skep'16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
