Tdv6_kma
Member Since: 05 Jun 2014
Location: Dumfries and Galloway
Posts: 9
  
|
Is that the brake shoe adjustments as per Bodsy's brake bible?
|
 2nd Aug 2014 1:54 pm |
|
|
Tdv6_kma
Member Since: 05 Jun 2014
Location: Dumfries and Galloway
Posts: 9
|
The whole mechanism is still attached to each other but can't get it to reset it's self with the advice on the threads or in Bodsy's brake bible so really could do with help  . Have my local 4x4 shop who specialises more in LR parts on stand by to order new motor, but I honestly don't want to go down that route as we have replaced 2 callipers on the passenger side rear and front and all four discs as well as the pads.
|
| 2nd Aug 2014 2:26 pm |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
|
Tdv6_kma wrote:Is that the brake shoe adjustments as per Bodsy's brake bible?
Yes. When the shoes are out of adjustment the EPB motor moves too far and can jam, hence the squealing.
You need to unjam the motor, then readjust the shoes. 
Believe me, I've been there, done that, got the sodding T-shirt.  Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
| 2nd Aug 2014 2:34 pm |
|
|
Tdv6_kma
Member Since: 05 Jun 2014
Location: Dumfries and Galloway
Posts: 9
|
I'm guessing keep adjusting till the squealing stops and hey presto all done till the next time, the shoes are ok but would it be worth while looking at replacing them? As we had to free them off and the springs are looking a bit worse for wear as well
|
| 2nd Aug 2014 2:49 pm |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
|
I seem to remember something about 8 clicks of adjustment per side and you'll be good to go.
If the shoes have survived and still have plenty of wear they should be ok. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
| 2nd Aug 2014 2:52 pm |
|
|
Tdv6_kma
Member Since: 05 Jun 2014
Location: Dumfries and Galloway
Posts: 9
|
Ok cheers will try that again and hopefully not get the squealing again till the next time
|
| 2nd Aug 2014 2:55 pm |
|
|
Tdv6_kma
Member Since: 05 Jun 2014
Location: Dumfries and Galloway
Posts: 9
|
Right I have done the 8 clicks thing and still getting the squeal but when I watch the motor it is squealing when it gets back to on mode which I am guessing is everything back to the motor from the drivers rear wheel arch it is also arching slightly when it gets fully out on the right hand of the motor could the shoes be needing to be changed or is my motor and cables nackered or can I adjust the cables to stop it arching the cable?
|
| 2nd Aug 2014 4:15 pm |
|
|
boardrider
Member Since: 03 Oct 2013
Location: central coast. nsw
Posts: 25
 
|
hi there,just want to thank mikey for the information on the epb fix,i to have been successfull in fixing this following the instructions provided.A BIG THUMBS UP FROM ME
boardrider
|
| 3rd Aug 2014 6:10 am |
|
|
Bushwanderer
Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050
|
Hi boardrider,
Your "location" is somewhat non-specific. Do you mean east coast, west coast, or some other coast of Oz?
Do you mean NSW, or some other state?
TIA,
Peter The Bearded Dragon
|
| 4th Aug 2014 4:25 am |
|
|
boardrider
Member Since: 03 Oct 2013
Location: central coast. nsw
Posts: 25
|
sorry to everyone.
its the east coast between sydney and newcastle. i forgot its global
boardrider
|
| 4th Aug 2014 8:10 am |
|
|
Bushwanderer
Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050
|
You might consider updating your location details in your profile.  The Bearded Dragon
|
| 5th Aug 2014 3:30 am |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 854
|
I think I'm going to have to try this during the week.
|
| 18th Aug 2014 9:22 pm |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 854
|
Disco_Mikey wrote:If anyone needs any clarification on any steps, let me know, and I will do my best to explain, and hopefully update the 1st post. It makes sense to me, but I have done this repair enough to make sense to me 
Is there any video to show the unwinding and relatching?
|
| 21st Aug 2014 6:53 am |
|
|
A.J.M
Member Since: 31 Oct 2009
Location: Carluke
Posts: 2821
|
This is today's job.
My handbrake has packed in, plus I have a sticking calliper at the rear right.
So a mate and I are going to tackle the jobs to get it working again.
Mikey fitted the brakes and epb shoes and did the bedding in procedure. The calliper has done 127k so if it doesn't free off I won't blame it.
|
| 23rd Aug 2014 2:25 am |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 854
|
Mine now sorted. Only removed the dirt. Still to be adjusted but working without shrieking.
|
| 24th Aug 2014 10:16 pm |
|
|
