Member Since: 04 Jan 2010
Location: Luebeck
Posts: 207
aux lighting A pillar trim issue -nearly SOLVED
Hi
urgent question
planning to wire my aux led lights this saturday
Is there an issue with the removal of the inner A pillar trim due to the airbag??(2007 model)
in the workshop manual there are clips shown which have to be removed before getting to a torx screw holding the trim - but i only found a plastic Airbag sign??
Has anybody got pics
btw its an LH drive
Thx for your help!!some
Last edited by DcNexus on 15th Jan 2012 11:19 am. Edited 3 times in total
12th Jan 2012 1:09 pm
Tawny Owl
Member Since: 22 Oct 2008
Location: Here and there
Posts: 1645
The small cover which has airbag written on just pops off to reveal the torx bolt , once the bolt is removed then the trim will just pop off , you won't be affecting the airbag in any way by removing the trim
12th Jan 2012 1:25 pm
DcNexus
Member Since: 04 Jan 2010
Location: Luebeck
Posts: 207
..that's good to hear
Thx for answering!!some
12th Jan 2012 1:40 pm
DcNexus
Member Since: 04 Jan 2010
Location: Luebeck
Posts: 207
managed to install all the cables and lights yesterday
I love LED !!!!!!!!!!!!!!
but I noticed interferences while listening to the radio when lights are turned on ????
Q: what is that big black cable for beneath the A pillar trim, besides the Airbag??
Xenon head lights
LEDs ..........fine adjustment has to be done....
sorry for the poor qualitysome
15th Jan 2012 10:59 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8221
It isn't a cable its the drain pipe for the sun roof.It can when others can't,
It will when others won't,
It goes where others don't.
15th Jan 2012 12:44 pm
DcNexus
Member Since: 04 Jan 2010
Location: Luebeck
Posts: 207
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
????
