ijwoo1
Member Since: 04 Jul 2010
Location: London
Posts: 29
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 SDV6 XS Auto Stornoway Grey 2010 Discovery 4 3.0 SDV6 XS Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Ministry of bad design - Brake line clips |
|
After lubricating everything in sight under the middle rear seat to stop a rattle, I decided the noise must be coming from under the car. Sure enough I find a brake line is flapping about, obviously twanging the bottom of the car as it goes over a bump. There are two clips that I can see and the brake line had come out of both of them.
The clips they have used are a joke, I cant work out if something is missing or they have just weakened so much that they no can longer hold the brake line in place. I guess it is to be expected, they have lasted well into the 4th week and 600 miles of varied terrain from A roads to Motorways
I've put a couple of tye wraps around the clip, not super tight but just enough to hold the clip together so the tube doesnt pop out the second you hit a bump.
Is this a common problem? Any better ways to clip the lines in place ?
|
1st Nov 2010 11:45 pm |
|
|