Landyman99
Member Since: 14 Sep 2020
Location: South Yorkshire
Posts: 5
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 XS Manual Unknown Colour 2008 Discovery 3 TDV6 XS Manual Unknown Colour](../images/veh/unknown.gif)
|
I have a problem with my 2008 manual D3, that when ever I exceed 60mph or roughly 100kph, I get a single loud chime followed by three warning messages flashing up on the message centre:
1. Special programs unavailable and a small orange circle with an exclamation mark lights up just under the temperature gauge needle.
2. EPB failure/HDC unavailable.
3. Suspension lowered and orange warning lights for stability control and suspension light up.
It can all be cleared by an engine restart and raising the suspension to off road height and lowering it back to standard.
Unfortunately I don’t have access to a code reader but I was wondering if anyone else has experienced the same issue, with regards to the speed, as when I have researched this problem it seems it can be caused by everything from a faulty brake light switch to a slipping clutch!
Any advice would be greatly appreciated.
Thanks, Nick
|
6th Jul 2024 10:11 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6279
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 XS Auto Stornoway Grey 2007 Discovery 3 TDV6 XS Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Well without the codes it is a guessing game, you could try the brake light switch as its a simple change, also the clutch can be checked by accelerating fast through the gears, but you need to see what error codes are logged.
Flack
|
6th Jul 2024 4:48 pm |
|
|