Member Since: 07 Apr 2013
Location: Halesowen
Posts: 66
Suspension problem.
Hi.my compressor doesn’t run.I have checked the 60amp fuse all OK and I have 12 volts with the engine running but I have no volts at the 2 wire compressor plug.,if I put a12 volt feed to the compressor it works.hope you can help.
Regards Mal.
17th Nov 2023 6:42 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5052
Cable connectors behind the D/S front wheel arch is likely to be the source, but diagnostic codes would also be helpful!
There is plenty covering this wiring fault if you use the search button above.yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
