| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
  
|
| Rear Parking Sensors jamming on |
|
I have a problem with my rear parking sensors, every time it rains they jam on and sound constantly, (when in reverse of course) once the car has dried out they work perfectly again. Not sure if its one of them or more thats causing the problem. I suspect it was caused by the guys at the car wash with a jet wash.
Are the sensors easy to change? I think I'll have to give Nick a call and check prices and part numbers.
 TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
|
 15th Apr 2008 12:07 am |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20764
 
|
There is an issue with water getting into the plugs for the sensors. LR brought out a new bumper harness to cure it. Best way to check is to take the sensors out and look in the plugs. If there is water, they will be all green inside due to corrosion. You may get away with just cleaning up the pins on the sensors though 
|
| 15th Apr 2008 7:22 am |
|
|
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
|
Thanks for that, how they come out?
Is it possible to test them to see if their defective and if I remove one will the system still work. So that I can identify the duff one.
PS are they the same front and back  TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
|
| 15th Apr 2008 8:12 am |
|
|
denny crane
Member Since: 29 Mar 2008
Location: Warwickshire
Posts: 147
  
|
Isn't it still in warranty?
|
| 15th Apr 2008 9:00 am |
|
|
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
|
No unfortunately 
I've been on my own from January !!!! TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
|
| 15th Apr 2008 9:16 am |
|
|
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
 
|
Reggieb wrote:
Thanks for that, how they come out?
You will need to remove the bumper unless you have elasticated arms. The sensor itself fits inside a bezel which is fitted to the bumper.
Once you've removed the bumper, you need to carefully prise open the 2 plastic retaining clips/lugs on the bezel and slide the sensor inwards (away from the visible side of the bumper).
The bezels can then be removed by compressing the 3 retaining clips and sliding them outwards.
Reggieb wrote:
PS are they the same front and back
They are different......the connector is at a different angle/position for the front and rear sensors.
Hope this helps. 2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG
|
| 15th Apr 2008 9:50 am |
|
|
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
|
Many thanks
Appears to be a bigger job than I thought  TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
|
| 15th Apr 2008 9:53 am |
|
|
Land Rover Nat
Member Since: 04 Feb 2006
Location: Buckie Scotland
Posts: 85
|
Mine is doing the same. Back to the stealer on Monday for there second attempt to cure the problem.
|
| 15th Apr 2008 11:09 am |
|
|
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23498
|
I had this problem, it was traced to a chaffed wire under the rear bumper. When it got wet enough, it would make a contact with the metal on the bumper.
|
| 15th Apr 2008 3:31 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20764
|
PaulP wrote:Reggieb wrote:
Thanks for that, how they come out?
You will need to remove the bumper unless you have elasticated arms. The sensor itself fits inside a bezel which is fitted to the bumper.
Nope. Can change all 4 without removing the bumper. If the harness if faulty though, then its bumper off.
Use a large brass punch and a hammer. No, it wont damage the sensor
|
| 15th Apr 2008 7:00 pm |
|
|
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
|
Quote:Nope. Can change all 4 without removing the bumper. If the harness if faulty though, then its bumper off.
Use a large brass punch and a hammer. No, it wont damage the sensor
Can you expand on that ???
Do you mean pushing the sensors in ??  TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
|
| 15th Apr 2008 11:48 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20764
|
Reggieb wrote:Quote:Nope. Can change all 4 without removing the bumper. If the harness if faulty though, then its bumper off.
Use a large brass punch and a hammer. No, it wont damage the sensor
Can you expand on that ???
Do you mean pushing the sensors in ??
Yes, push the sensors in the way. Then there are 4 philips screws holding a bit of trim to the bumper, undo these then you can get your hand up the back to push the surround out and push the sensor through the hole to check it.
It is a bit tight for space, i will say, but its much quicker and easier than taking the bumper off
|
| 16th Apr 2008 6:32 am |
|
|
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
|
Thanks Disco_Mikey
Unfortunaty I have fingers like sausages so its back to using child labour again  TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
|
| 16th Apr 2008 7:43 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
