Garwood56
Member Since: 24 Jun 2021
Location: West Sussex
Posts: 422
  
|
| Ride height sensor metal cover screws rusted out🤬 |
|
Ok so front air bags and front ride height sensors arriving tomorrow. However the screws on the metal cover on each of the sensors are completely rusted. Anybody had the same and what the best way to remove , drill out, grind off?? I don’t want to do any damage to other components. Thanks.
|
 27th Mar 2023 6:39 pm |
|
|
|
|
Garwood56
Member Since: 24 Jun 2021
Location: West Sussex
Posts: 422
|
Sounds good to me 👍
|
| 27th Mar 2023 8:13 pm |
|
|
Thommo805
Member Since: 12 Feb 2023
Location: Kent
Posts: 21
|
Yea my rear left height sensor the screws holding it are totally rounded and access is tricky can’t see how woukd get a drill in there , is that the method or an easier way ?
|
| 28th Mar 2023 8:49 pm |
|
|
Garwood56
Member Since: 24 Jun 2021
Location: West Sussex
Posts: 422
|
Not doing the rears yet just fronts. Access on front seems ok to drill them out. As Disco Mikey mentions left hand drill bit. Will let you know how I get on.
|
| 28th Mar 2023 9:11 pm |
|
|
