Member Since: 24 Sep 2007
Location: Cynon Valley
Posts: 123
If you are going to use the front passenger footwell connection for the AUX, then you MUST plug in a jack plug into the rear AUX if you have one. WIGGS was a great help to me when I did mine, and in fact it was not as hard as I first imagined.2010/60 Discovery 4 XS Zermatt Silver - Privacy Glass, Timed Climate (with remote), Voice, 4x4 screen, Bong on lock/un-lock (Pete BellAutos)
Discovery TDV6 SE (06) Gone!
Military 90 (1986) gone but not fogotten!
TV Option (Thanks to Wiggs)
Parrot CK3100
27th Mar 2008 10:56 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Picture ok if your in a digital area ...which are gettiing better ..
Dont expect to see a picture on the move though ..unless you get some proper amplifiyed diversity antenna's
WelshDisco G4 Gone ...but not forgotten
28th Mar 2008 12:27 am
mal_NW
Member Since: 04 Mar 2008
Location: Garstang, Lancs
Posts: 937
WelshDisco wrote:
If you are going to use the front passenger footwell connection for the AUX, then you MUST plug in a jack plug into the rear AUX if you have one. WIGGS was a great help to me when I did mine, and in fact it was not as hard as I first imagined.
Picture ok if your in a digital area ...which are gettiing better ..
Dont expect to see a picture on the move though ..unless you get some proper amplifiyed diversity antenna's
WelshDisco
So to get DVB in the car you nedd:
1. DVD box as above.
2. Fixing kit? (available from ebay seller)
3. 12V adaptor for above box? (available from ebay seller)
4. The cables to connect box to rear of stereo, I see the cables but are they phono on the other end?
5. Where does the freeview box go?
6. If you upgraded at a later date to put headrest screens in you could output to them no problem (from the freeview box?)
7. Total cost?
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
1, yes
2, included in the freeview box
3, included in the freeview box
4, yes a cable will be need to be made up ..smb connector at one end /rca at the other
5, any were you want ...i have mine in the passenger side rear cubby box
6, yes ..the freeview has 4 outputs for tv's
7, £32.99 for freeview and about a fiver for the freeview to sat nav lead ...
If your gonna do it i will give you more info ..or come and see my carG4 Gone ...but not forgotten
28th Mar 2008 11:50 am
mal_NW
Member Since: 04 Mar 2008
Location: Garstang, Lancs
Posts: 937
wiggs wrote:
1, yes
2, included in the freeview box
3, included in the freeview box
4, yes a cable will be need to be made up ..smb connector at one end /rca at the other
5, any were you want ...i have mine in the passenger side rear cubby box
6, yes ..the freeview has 4 outputs for tv's
7, £32.99 for freeview and about a fiver for the freeview to sat nav lead ...
If your gonna do it i will give you more info ..or come and see my car
It looks like a good idea, might keep the kids quiet when stuck in traffic.
What about if I want to input more in to the screen, such as my phone (video out composite), would I need one of those other boxes you have?
wiggs wrote:
5, any were you want ...i have mine in the passenger side rear cubby box
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
I dont have "any other boxes" as such.
The screen has 3 inputs ..so you just connect there .
If you want a proper button on your touch screen then your looking at an interface box which range from £500 - £700 ..not worth it in my opinion.
I have a dvd player which has an aux source in that aswell ..so basically another input.
I use ...
1 input for reversing camera
1 input for dvd
1 input for freeview
1 input as a spare ...to connect anything ..but i use it for another camera
Just plug in here ...and use the diagnotic screen to enable the picture
G4 Gone ...but not forgotten
Last edited by wiggs on 28th Mar 2008 12:24 pm. Edited 1 time in total
28th Mar 2008 12:19 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
mal_NW wrote:
Looks like there is loads of room in there, and lots of fuses, did you tap of one of them?
Yes you can use the fuse box there ...i connected into the rear ciggy lighter as i wanted the power to work only after the ignition was turned to possition 1 ...so it cant flatten my batteryG4 Gone ...but not forgotten
28th Mar 2008 12:23 pm
mal_NW
Member Since: 04 Mar 2008
Location: Garstang, Lancs
Posts: 937
How do you get the Screen to seen the inputs with out the special box. -do you have to but a code in or something ?
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum