Hi Rich, will this fit over a bottle jack?
Thanks, Andy1978 Series 3 88 Military Green (Gone)
1983 110 V8 Masai Red (Gone)
1997 Discovery 1 XS Cobalt Blue (Gone)
1999 Defender 110 TD5 Safari Epsom Green (Gone)
2001 Freelander Sport Buckingham Blue (Gone)
2016 Discovery 4 Landmark Yulong White "Larry" (Written off)
2015 Discovery 4 HSE Luxury Corris Grey "Sol"
Hi Rich, will this fit over a bottle jack?
Thanks, Andy
Fairly sure this is for a trolley jack..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
What threw me was that "the Diameter of jack fitting is 30mm", I don't know any trolley jacks that small1978 Series 3 88 Military Green (Gone)
1983 110 V8 Masai Red (Gone)
1997 Discovery 1 XS Cobalt Blue (Gone)
1999 Defender 110 TD5 Safari Epsom Green (Gone)
2001 Freelander Sport Buckingham Blue (Gone)
2016 Discovery 4 Landmark Yulong White "Larry" (Written off)
2015 Discovery 4 HSE Luxury Corris Grey "Sol"
30th Mar 2022 3:34 pm
ronald.soak
Member Since: 29 Apr 2008
Location: London
Posts: 533
Many trolley jacks have a removable pad. The diameter of the spigot on this pad is commonly 30mm so you just lift out the pad and plug in the adaptor. Other spigot diameters exist and some pads cannot be removed in this way.
30th Mar 2022 3:44 pm
Patman
Member Since: 16 Aug 2019
Location: Cornwall
Posts: 314
Can anybody tell me who makes these adapters please?
Unfortunately my jack has a 13mm thread not 16mm 😠Patman
Derek the Discovery keeper and owner
@Patman The 16mm fits into the chassis holes on the vehicle the 30mm part fits into the trolley Jack rather than the jacking plate, don’t know what you are on about with the 13mm, also why would you says dibs if you don’t know what it does 🤷♂️Goodyear Duratracs
Pirelli ATR gone
GG AT Gone
RLD Spare wheel protector
Leeds - London weekly return
Club ctek mxs10
Yorkshire 4x4 Response
8th May 2022 3:02 pm
LRD4GAB
Member Since: 05 Nov 2020
Location: Tamworth
Posts: 499
I'll take 2nd dibs on it ?
8th May 2022 3:05 pm
Patman
Member Since: 16 Aug 2019
Location: Cornwall
Posts: 314
ebygum32 wrote:
@Patman The 16mm fits into the chassis holes on the vehicle the 30mm part fits into the trolley Jack rather than the jacking plate, don’t know what you are on about with the 13mm, also why would you says dibs if you don’t know what it does 🤷♂️
I know how it fits I miss measured my jack and the plate on my jack is 13mm and the chassis rail is 30mmPatman
Derek the Discovery keeper and owner
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
