Hi All
Can anybody relate to this fault. Body Control
B1C62-14 (2F) Battery saver relay output circuit - General electrical failure - circuit short to ground or open
The only thing I can find is my interior lights will not work on the passenger and drivers sides middle one is fine. I have tried new lampsD3 HSE
Last edited by Beno2 on 27th Nov 2021 12:14 pm. Edited 1 time in total
25th Nov 2021 12:32 pm
forest66
Member Since: 04 Jan 2021
Location: Lymington
Posts: 85
that will be the cause the expected current draw/voltage is no longer on that circuit hence the fault , look to power supply fuse worth checking sorry cant be more helpful
25th Nov 2021 12:42 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 996
If it was the fuse surely the middle lamp wouldn’t workD3 HSE
25th Nov 2021 1:22 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 996
Maybe not explaining myself.the courtesy lights work as they should do.its the map lights ( if that’s what they are called) that will not come on front and rearD3 HSE
25th Nov 2021 1:50 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
check fuse 2
25th Nov 2021 6:08 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 996
Thankyou
Will check in the morning. Will this be in the glove box compartment?D3 HSE
25th Nov 2021 7:48 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
Yes
25th Nov 2021 7:53 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 996
Isn't fuse 2 for right hand side lights?D3 HSE
25th Nov 2021 7:54 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 996
Bump
Is as the error code says a faulty relay?D3 HSE
26th Nov 2021 1:08 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
Beno2 wrote:
Isn't fuse 2 for right hand side lights?
No.
You can’t change the relay.
I’ll have to have a look to see if you can bypass it.
As long as you don’t have kids leaving the lights on
26th Nov 2021 7:10 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 996
Confused when I pulled fuse 2 the front side light stopped workingD3 HSE
26th Nov 2021 9:29 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20855
That's because fuse 2 protects the front and rear sidelights on the RH side...
Are you having any specific problems, or is it just a fault code showing up?My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum