Rich_Allen
Member Since: 26 Nov 2013
Location: Stamford
Posts: 107
  
|
Evening all, I need a fuel pressure guru! Lol
So after finding my canbus broken wire and now being able to crank the engine it won’t start..
I think it’s either not getting the fuel or it’s just too low on pressure..
I was told it’s had a new in tank pump and various other bits but I’m taking it all with a pinch of salt..
When I turn on the ignition I’m getting circa 790kpa on the iid tool for fuel pressure.
When cranking (for about 10-15 seconds) it slowly climbs up to about 16/1700 kpa...
Anyone with a crystal ball?
I’ve just ordered a gauge for the valve on the top of the engine and will start testing current draw etc on lpfp.
Cheers
|
 26th May 2021 8:23 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10367
 
|
These engines won’t start instantly if they have been rebuilt / had work
|
| 26th May 2021 8:50 pm |
|
|
