| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
bobsere
Member Since: 17 Apr 2010
Location: bedfont
Posts: 54
  
|
| New lock still giving problem |
|
Hi I have a query my central locking on front passenger door locks but doesn’t unlock with remote and the rear driver side door is staying locked at all times. I cannot open either door using the inside latches. I have replaced the passenger front door lock actuator but problem remains , I’m now thinking it may be the wiring splice problem, I just wanted to check if anyone has had the problem where the doors will lock but 1 door or more will not unlock whilst the others operate normally and could this be down to the wiring splice (hope this makes sense)
|
 5th Mar 2021 10:46 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6235
 
|
The green wire splice would be my next thing to check/repair.
Flack 
|
| 6th Mar 2021 10:04 am |
|
|
bobsere
Member Since: 17 Apr 2010
Location: bedfont
Posts: 54
|
Cheers flack will give it a go in the week just seems odd that I will always lock but not unlock even on the new lock actuator
|
| 6th Mar 2021 11:12 am |
|
|
bobsere
Member Since: 17 Apr 2010
Location: bedfont
Posts: 54
|
Cut the wires today joined together but didn’t cure the problem,also the channel the loom is in was dry and had no evidence of water ever being there. The lock that I used to replace was an aftermarket lock so I’m wondering if that could be faulty, suppose the only way to tell would be to slave in a known working lock but I’m a bit reluctant to pay out only to find the fault is still there, any ideas?
|
| 22nd Mar 2021 9:06 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
|
Also have a look for any joints in these colour wires and redo
Pete K wrote:probably the black/purple wires you should be looking at
or black/green
black/red
|
| 22nd Mar 2021 9:17 pm |
|
|
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
|
bobsere wrote:Cut the wires today joined together but didn’t cure the problem,also the channel the loom is in was dry and had no evidence of water ever being there. The lock that I used to replace was an aftermarket lock so I’m wondering if that could be faulty, suppose the only way to tell would be to slave in a known working lock but I’m a bit reluctant to pay out only to find the fault is still there, any ideas?
cheap Chinese lock?? i fitted one in the nsr of my d3 works sometimes and doesn't work other times,if i press the unlock several times it will open and when i find a good priced genuine unit i will replace it
i suspect yours is the same please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
| 22nd Mar 2021 10:27 pm |
|
|
bobsere
Member Since: 17 Apr 2010
Location: bedfont
Posts: 54
|
Cheers eight foot, I may have to bite the bullet and buy an original lock just to try and see if that is the case, it’s just that the aftermarket one is giving exactly the same problem as the previous lock, not unlocking at all but locks ok, I’m a bit at a loss with it all
|
| 23rd Mar 2021 12:30 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
|
Bit of a coincidence they both so the same.
|
| 23rd Mar 2021 10:47 am |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
|
Sounds like a wiring issue Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
| 23rd Mar 2021 11:07 am |
|
|
bobsere
Member Since: 17 Apr 2010
Location: bedfont
Posts: 54
|
Could anybody tell me is it possible to plug drivers side door lock actuator into the passenger side plug.if this is possible I may take the drivers door lock actuator out and slave it onto the l/h door
and just leave it exposed then remote operate operate see if it unlocks
|
| 23rd Mar 2021 6:02 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
|
Why don’t you take your old motor and loosely plug it into a good door.
Front plugs probably compatable
Be warned, my lock only failed when the door trim on. 
|
| 23rd Mar 2021 7:32 pm |
|
|
bobsere
Member Since: 17 Apr 2010
Location: bedfont
Posts: 54
|
Cheers pete,brilliant idea I’ll give it a go at weekend 👍
|
| 23rd Mar 2021 8:34 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
