Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
|
Any good suggestion/recommendation on a light bar for the front with lights,
I prefer a roof mounted one and have a small budget, if anyone has one with lights for sale message me please.
Thanks
Footnote be careful all you guys who will want to go off playing in the snow a simple mistake can cause you so much pain and suffering to yourself and most of all to your pride and joy , your Landy. pete truckle
|
8th Feb 2021 8:21 pm |
|
|
Yargo
Member Since: 25 Dec 2020
Location: Europe
Posts: 326
|
UK made LAZER lights, but they cost more than your kidney.
|
8th Feb 2021 8:28 pm |
|
|
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
|
I have seen them mentioned before on here,way out of my league,bar and lights over 1200 squid pete truckle
|
8th Feb 2021 8:49 pm |
|
|
Yargo
Member Since: 25 Dec 2020
Location: Europe
Posts: 326
|
95% of lights bars sold on ebay/amazon and other online shops are Chinese crap, not worth the money and won`t last. There seems to be a gap in the market some sort of middle class quality and adequate price point.
|
8th Feb 2021 9:09 pm |
|
|
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
|
Quite agree it's from one end £70 and up to something like 2k plus.
Regards this forum I have occasional read some owners fitted them then removed them because of the glare of the bonnet I was hoping one of those owners still had them and would be wanting to sell them.
Pete pete truckle
|
8th Feb 2021 9:24 pm |
|
|
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
|
Yargo wrote:95% of lights bars sold on ebay/amazon and other online shops are Chinese crap, not worth the money and won`t last. There seems to be a gap in the market some sort of middle class quality and adequate price point.
I agree, so stop buying new stuff like this on those platforms, BUT / however... it is not the country where it is buildt (although i prefer “own market” stuff EU & UK) but the quality control... even the eastern country’s can produce the good stuff... i have a LED lightbar made in china, distributed bij Bosch.... not expensive either... with 2 year warranty etc.... bottomline... just buy local..... or through a well known webshop from a firm you trust. Even they can sell a good prices, sometimes or often cheaper than mentioned platforms.... Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
|
8th Feb 2021 9:40 pm |
|
|
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6697
|
As a store, Lumise has a rather good reputation. They sell lights annually for approximately 8.5M EUR.
|
8th Feb 2021 9:44 pm |
|
|
fusion158
Member Since: 08 Apr 2014
Location: California
Posts: 61
|
Check out the light bars by Lightforce. The are Australian made and very high quality. I'm running their Spot/flood combo lights on my ARB bumper. They are stocked in the UK by www.4x4obsession.co.uk
|
8th Feb 2021 10:09 pm |
|
|
Fatneck73
Member Since: 03 Dec 2020
Location: Essex
Posts: 88
|
Trucks wrote:Quite agree it's from one end £70 and up to something like 2k plus.
Regards this forum I have occasional read some owners fitted them then removed them because of the glare of the bonnet I was hoping one of those owners still had them and would be wanting to sell them.
Pete
I have this issue on my D2...wont go roofbarlights again and would recommend you avoid if poss. Tisnt just ‘a glare’...tis a proper bright reflection.
|
8th Feb 2021 10:46 pm |
|
|
will.i.am
Member Since: 05 May 2016
Location: hertfordshire
Posts: 250
|
tbh i would reccomend the below in order of the best quality
1- Lazer lights - if your budget isnt this ridiculous then go for
2- Stedi - if the budget is still not there go for
3 - LTPRTZ
I have got and had chineese light bars and spots from and also all three of the above on my current and different vehicles and i can tell you from experience you will be better off with a torch out the window then going down the chinease crappy route.
Speak to Dan from South Essex Automotive (i am in no way affiliated to him) - he did me a discount off th web prices from Lazer that meant i couldn't refuse using utility lights around my roofrack rather than go for any other brand.
if you use a discount code from a guy on facebook (ProjectDisco3) you can also get 5% off Stedi lights.
LTPRTZ, you may be able to get a discount if you message them on their chat and ask nicely! lol
It is worth saving and spending with lights rather than go down the crappy route.
|
9th Feb 2021 7:47 am |
|
|
timmyt79
Member Since: 18 Oct 2016
Location: Pemrokeshire
Posts: 588
|
I have been using a few diffrent types of 'Strands' lightbars and worklights,i have to say they are excellent..as good as any i have seen/used before.They are extremely well built and have quality connections and wiring harnesses.
i bought mine from here
https://www.kudauk.ltd.uk/shop/led-lights-and-spotlights/led-bars
Hope that helps
|
9th Feb 2021 9:23 am |
|
|
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
|
Thanks to you all, some thoughts there I will follow up on
Thanks again
Pete pete truckle
|
9th Feb 2021 9:35 am |
|
|
will.i.am
Member Since: 05 May 2016
Location: hertfordshire
Posts: 250
|
[quote="timmyt79"]I have been using a few diffrent types of 'Strands' lightbars and worklights,i have to say they are excellent..as good as any i have seen/used before.They are extremely well built and have quality connections and wiring harnesses.
i bought mine from here
https://www.kudauk.ltd.uk/shop/led-lights-and-spotlights/led-bars
These look really interesting! - I'm guessing that if they are a company that bring them in from overseas but stand by the brand abd guarantee them then what can go wrong. thanks for sharing Timmy, another brand to look at when we are purchasing in the future!
|
9th Feb 2021 9:36 am |
|
|
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
|
Just emailed them asking for some advice on a couple off bars/LEDs they seem to have a vast range so let's see what they come back with.
I think fitting will be the main problem as I really don't want to drill the roof /side pullers
I did see a chap on the forum bought some right angled brackets and got them to fit into the roof bar rail runners looked good and well made and simple,dammed if I can find it no forgot to mention the width I wanted blast it o well wait till they see what they have to offer.
Thanks
Pete pete truckle
|
9th Feb 2021 10:25 am |
|
|