Farmer joe
Member Since: 10 Sep 2020
Location: Dungannon
Posts: 46
Big end bearing torque 2.7 tdv6
Hi, is any one able to tell me the torque settings for the big end bearings on the 2.7 tdv6? Thanks.
10th Sep 2020 10:21 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1807
Can't seem to find anything in the manuals. As a general torgue setting - M6 bolts are 10 nm and M8 bolts are 20 nm.
11th Sep 2020 10:05 am
jenseneverest
Member Since: 12 Jun 2017
Location: somewhere
Posts: 769
they are normally a lot more than that, i cant find for the td27 but the 3.0 version is 20nm and then 90 degrees.
11th Sep 2020 10:22 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14027
Hiya
Long shot and don’t know if this will be of any help
Does the citroen C6 have the same DT17 2.7 engine , found this which I don’t mind admitting has gone over my head
Thought I would post it just in case it’s helpful
Click image to enlarge
Click image to enlarge
11th Sep 2020 5:07 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Yuppp that is the right torque setting!
Peugeot/citroen =psa, they use the same basic engine as LR/Jag
My (New) big-end bolts with this exact torque setting have now covered 4500k + since last week.. Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
11th Sep 2020 8:46 pm
jenseneverest
Member Since: 12 Jun 2017
Location: somewhere
Posts: 769
Good stuff
Can someone attach the full manual then please
11th Sep 2020 8:56 pm