Member Since: 18 Jun 2020
Location: Peterlee
Posts: 37
Hight not right
Hi peeps help.ive just had the rear top wishbone changed .and that side is 1inch higher than other what can i do to sort this cheers
21st Aug 2020 7:25 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4869
You'll need to get it calibrated if you disturbed the height sensor. Did you set the height correctly (466 mm) before tightening the bolts?yµ (idµ - eAµ) ψ=mψ
21st Aug 2020 7:29 pm
K2hwy1
Member Since: 18 Jun 2020
Location: Peterlee
Posts: 37
I didn't do it the garage did it
21st Aug 2020 7:30 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4869
Take it back, were they LR dealership, LR indy, or neither?yµ (idµ - eAµ) ψ=mψ
21st Aug 2020 7:32 pm
K2hwy1
Member Since: 18 Jun 2020
Location: Peterlee
Posts: 37
Just a regular garage who sometimes works on jeeps .so do I need to take it to a proper rover garage?
21st Aug 2020 7:33 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4869
I suppose your first port of call is to take it back and ask them to sort it.
The default height setting on the front susp is 466 mm from the centre of the hub to the bottom lip of the wheel arch, before the bolts are tightened! They may also have to perform a calibration on that corner, especially if they unplugged the sensor.yµ (idµ - eAµ) ψ=mψ
21st Aug 2020 8:18 pm
K2hwy1
Member Since: 18 Jun 2020
Location: Peterlee
Posts: 37
Ok thanx for help
21st Aug 2020 8:31 pm
K2hwy1
Member Since: 18 Jun 2020
Location: Peterlee
Posts: 37
Great help thanx
21st Aug 2020 8:32 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4869
Your welcome, by the way I meant to say earlier if you fill out your profile fully it will be easier to assist you if we know what year and model you have. yµ (idµ - eAµ) ψ=mψ
21st Aug 2020 8:52 pm
K2hwy1
Member Since: 18 Jun 2020
Location: Peterlee
Posts: 37
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum