Member Since: 10 Mar 2021
Location: Nicosia
Posts: 80
D3 Parts Help Please!
Good morning to all,
I would appreciate your feedback on some parts I ordered and I am very reluctant on using these.
When I ordered the parts I specifically asked for no Britpart / Allmakes but the 3 boxes arrived and lo and behold…..the main items that are needed are either Britpart or Allmakes! Now the car is booked in for a major maintenance job and I’m in a huge dilemma.
Britparts are:
EGR Blanking Kit
Silicone Intercooler/Hose Kit
Front and Rear Suspension Arm Fitting Kit (bunch of bolts for the arms basically)
Circlip Rear Hub (Part.No. RLG000010)
Allmakes:
All the Brake Hoses
Bearing Kits (SNR)
Now with the allmakes it’s a bit strange since the parts are clearly other brands but have the allmakes sticker on them. The bearing kits are SNR and the brake hoses are the attached photo since I cannot make out what the brand is.
I used these 2 brands once on a 300TDI and vowed never again. Anyone have any feedback for these items? I really do not have the time or money to experiment and keep needing to go back Into the mechanics to replace these parts (which is usually the case). On the other hand the return and sourcing new parts will take at least a month (plus extra customs and shipping fee) and the car just sitting there) with the holidays coming up.
Still haven’t contacted the site I purchased the items from so do not know what their response will be but I really want to avoid the hassle of low quality bad parts.
Thank you in advance
Discovery 3, TDV6, HSE, 2006
GAP IID BT Tool
2nd Aug 2021 7:07 am
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4194
I know it's not always easy from outside of the UK but if you use one of the site sponsors (like advanced factors) then you'll always get what you order... worth eliminating that risk from the outset...I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
2nd Aug 2021 7:43 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
If it has a G at the end of the part number Im always happy to use to, believe it is the same as the original part fitted without the same massive cost
2nd Aug 2021 7:51 am
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6656
It should be but usually without the logo. I bought a thermostat housing for the V8 and the place for the logo was obscured/scratched out. Britpart buys a lot of JLR spares and reboxes them, I got told.
2nd Aug 2021 9:57 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10551
I don't have any experacnce of the Britparts parts you ordered.
However I would like to think they wouldn't be any worse than others.
They either fit or don't fit. And once fitted to the car, should last the same time as other brands
2nd Aug 2021 10:08 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20787
We spend £20k a month with Britpart.
Their own brand stuff can be a bit hit & miss, but their OEM/G range is just fine, and is what we normally stock My D3 Build Thread
Member Since: 10 Mar 2021
Location: Nicosia
Posts: 80
Hi Disco_Mikey,
Do all their parts have a G if they are genuine or does that vary? All the parts I mentioned above do not have the G at the end of the part number. I spoke with the supplier (not sure if its OK to mention the name here) they assured me its top-quality OE parts they supply just so to avoid customer complaints and returns etc...
The parts that worry me the most are the turbo hoses and the fitting kits for all the upper and lower arms. I'm thinking about purchasing all the bolts again from a store nearby just to be sure.
Last time I fitted Britpart hoses to my RRC 300TDi and some bushes they lasted about 1 week (and that was just commuting to work and back)Discovery 3, TDV6, HSE, 2006
GAP IID BT Tool
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum